0

Pressure and Gas at Work

Pressure and gas at work from a mains supply can be very dangerous. Gas from mains is an explosive hazard if not used correctly. In addition, poorly maintained systems can cause death from carbon monoxide poisoning. It is important to make sure anyone employed to work on gas appliances is a Registered Gas Installer (RGI). According to Gas Networks Ireland:

“A Registered Gas Installer is an installer or service engineer who has completed the required gas installation safety training, who has the necessary insurance to carry out gas installations to the legal standard and who is registered with the Register of Gas Installers of Ireland.”

You should never use an unregistered gas installer to carry out work on your gas appliances, such as gas boilers, no matter how seemingly convenient or tempting it may be. Not even if this unregistered engineer is Daniel O’Donnell.

Even if it’s Daniel – Registered Gas Installers 30 second TVC. Run time 30s.

 

Pressure Systems

A pressure vessel is a container that holds a liquid or gas under pressure. A pressure system is one or more such vessels including associated pipework. Examples of pressure systems include compressed air systems, boilers, steam heating systems and autoclaves. If a pressure system fails during operation it can kill or injure people in the area. In addition, a significant damage to the property can happen due to impact from the blast, debris from the explosion and fire from escaping flammable gases or liquids.

 

Gas Cylinders

Gas cylinders can cause the same injuries as pressure vessels should the cylinder fail or be damaged. In addition, they can cause manual handling injuries from lifting and carrying heavy cylinders and crush injuries should cylinders fail.

Basic handling precautions include:

  • Securing cylinders upright so they do not fall.
  • Keeping cylinders away from fire.
  • Making sure cylinders are not dropped or banged.
  • Moving larger cylinders with a special hand truck rather than dragging or rolling them.
  • Always checking the identity of the gas before using it.

The Health and Safety Authority of Ireland (HSA) has a useful information page about gas titled Liquefied Petroleum Gas (LPG) Storage.

General Pressure and Gas at Work Controls

General controls when pressure and gas at work are in question include:

  • Regular maintenance and correct repair from a competent person.
  • Safe systems of work.
  • Training and supervision.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Dangers of Vibration at Work

Use of plant and equipment that produces vibration is often not considered as a serious risk and dangers of vibration at work are often overlooked.

Vibration is the transmission of force from work processes into the worker. The Health and Safety Authority of Ireland (HSA) defines vibrations as ‘rapid movement to and fro or oscillating movement‘.

 

Examples of Vibration at Work

People in the course of their work life may be exposed to many sources of vibration. Dangers of vibration at work are more often overlooked than not. Some vibration affects the whole body (WBV), e.g. when driving a dumper truck over rough and even ground. Here the vibration, in the form of large shocks or jolts, is transmitted to the whole body via their feet or the seat. This could cause injury to the lower back and spine.

The most common problem is Hand Arm Vibration (HAV). HAV is caused by exposure to vibration, e.g. from using hand power tools. This can be very disabling, causing severe pain in hands and arms and lack of hand movement and feeling in the fingers. It is preventable but permanent once the damage is done.

 

Dangers of Vibration at Work – HAV Symptoms

The most common HAV symptoms to look for are:

  • Tingling in the fingers.
  • Loss of feeling and sensation in the fingers.
  • Reduced strength in the hand.
  • Fingers that go white in the cold and then red and painful on recovery.

 

Dangers of Vibration at Work – HAV Controls

Dangers of vibration at work, i.e. risk from vibrating tools or machines can be minimised by:

  • Introducing methods that eliminate, substitute or reduce the exposure to vibration.
  • Avoiding prolonged or frequent use of vibrating equipment.
  • Keeping cutting tools sharp so they remain efficient.
  • Making sure equipment is well maintained.
  • Avoiding forcing or gripping the tool more than is necessary.
  • Wearing gloves to protect the hands.
  • Exercising and massaging the fingers during breaks to restore circulation.

Health surveillance is crucial to spot and respond to early signs of damage.

 

Dangers of Vibration at Work – Further Reading

Chapter 2 of Part 5 and Schedule 6 to the Safety, Health and Welfare at Work (General Application) Regulations 2007 (S.I. No. 299 of 2007) as amended by the Safety, Health and Welfare at Work (General Application) (Amended) Regulations 2007 (S.I. No. 732 of 2007) sets down the minimum requirements for the protection of workers from the health risks associated with vibration in the workplace. This is a legislation that looks into dangers of vibration at work.

The Health and Safety Authority of Ireland (HSA) on their webpage Vibration at Work provide relevant to vibration at work information.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Workplace Transport and Vehicles

Almost all businesses use some form of workplace transport and vehicles. There are many examples. A busy factory site with lorries being loaded for despatch. Forklift trucks whizzing around the site. Staff arriving for work in cars. Visitors and staff walking around the site and delivery vehicles reversing into dock loading bays.

Without controls aimed at workplace transport and vehicles, there is a high likelihood of an accident occurring. Unfortunately, almost every year a number of people are killed in vehicle accidents at the workplace.

 

Risk Assessment – Workplace Transport and Vehicles

A risk assessment must be carried out to identify the hazards and implement controls to minimise the risk. Such controls may include:

  • Clearly marking segregated traffic routes separating pedestrians from vehicles. This would be ideally done with physical barriers.
  • Making sure route ways are sufficiently wide for the vehicle, for example aisles between warehouse racking should be wide enough for a forklift truck to move easily and manoeuvre with loads.
  • Avoidance of obstructions in traffic routes by enforcing good housekeeping.
  • Sufficient lighting, both externally and internally, to enable drivers to identify obstructions, other vehicles and pedestrians.
  • Keeping traffic routes in good repair so uneven surfaces, holes, etc. do not cause vehicle damage or accidents.
  • Speed limits that are displayed and enforced as well as signage to alert drivers to other hazards such as low headroom, or overhead cables.
  • Designing traffic routes to avoid blind bends and where visibility is restricted, mirrors or implementing one-way systems should be considered.

 

Common Causes of Accidents

When we talk about workplace transport and vehicles, one of the most common vehicles used in the workplace is a forklift truck. They account for many of all workplace transport accidents.

Common causes of accidents are:

  • Driving too fast.
  • Unbalanced loads.
  • Horseplay.
  • Reversing.

Reversing of workplace transport and vehicles is a frequent cause of accidents. Consideration should be given to ensure adequate space for reversing vehicles and restricting access to the reversing area. This area should be clearly marked and signed.

Visiting drivers should be made aware of the site layout and transport routes. It may be necessary to provide instructions in other languages for foreign drivers and allow for the fact they may have different visibility from left hand drive vehicles.

 

Maintaining Safe Workplace and Transport Vehicles

There are many different types of workplace and transport vehicles that can be used. A proper selection will depend on the task to be performed. It is very important that the correct vehicle is selected for the appropriate task and that the vehicle is safe to use. As well as regular routine maintenance, there are some basic pre-use checks drivers should make. These include:

  • Horn.
  • Lights.
  • Brakes.
  • Tyres.
  • Oil Spillages.
  • Seat and Seat Belt.
  • Any Obvious Signs of Vehicle Damage.

Whichever vehicle is being driven, the driver must be trained and competent. Safe system of work should be in place to make sure unauthorised staff cannot operate vehicles and there are sufficient work breaks to stop drivers becoming overtired.

 

Safety Management Resources for workplace and Transport Vehicles

The Health and Safety Authority of Ireland provides a comprehensive key transport safety management resources available on their website page titled Vehicles at Work. The resources are a convenient and easy to use information portal. In addition, the HSA has published a convenient Information Sheet that provides basic guidance on the management of vehicles and mobile work equipment in the workplace.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Noise at Work

Often wrongly disregarded as trivial, noise at work could have a severe impact on human health. Any unwanted sound around us, or loud discordant or disagreeable sound or sounds can be referred to as noise. While low levels of noise in the workplace are unlikely to cause harm, louder levels of noise can result in permanent hearing damage or loss.

 

Legislation in Relation to Noise at Work

The General Application Regulations 2007, Chapter 1 of Part 5: Control Of Noise at Work is available legislation to protect workers from noise exposure. This legislation sets down the minimum requirements for the protection of workers from the health risks associated with noise in the workplace.

In addition, the Health and Safety Authority of Ireland has published Noise related FAQ on their website. This is a sound source of information for most Noise related questions.

 

Signs of Excessive Noise at Work

The effects of very loud noises are often instantly apparent, but damage caused through exposure to lower levels of sound over a longer period of time may initially go unnoticed.

Generally speaking, a person is exposed to excessive levels of noise when:

  • They have to shout to be clearly heard by someone 2 meters away.
  • Their ears are still ringing after leaving the workplace.
  • The noise is intrusive (e.g. a vacuum cleaner) for most of the day.
  • They work in a noisy industry (e.g. construction).
  • There are noises due to impacts such as caused by hammering.

 

Symptoms of Hearing Damage

Noise is measured in decibels (dB). Environments of 80 dB or more require employers to carry out a noise risk assessment and control methods should be introduced, such as providing information, training and hearing protection. If noise levels are above 85 dB, hearing protection zones should be established and PPE provided to anyone needing to enter a hearing protection zone.

Some of the symptoms of hearing damage are:

  • Temporary hearing loss after exposure to loud noise.
  • Ringing or noises in the ears (tinnitus).
  • Difficulty is distinguishing similar sounding words.
  • Muffled sounds.
  • Background noises making conversation confusing.
  • Having to ask people to speak louder or increase the volume on TVs and radios.

 

Selecting PPE for protecting against Noise at Work

When selecting PPE, it is important to make sure that the equipment is:

  • selected carefully with sufficient rating for the noise hazard,
  • fitted correctly,
  • compatible with other PPE used by the workforce,
  • properly maintained,
  • worn whenever it is appropriate.

In noise control areas, fire alarms must be supplemented with flashing lights or beacons. In the interest of safety, the wearing of hearing defenders outside the restricted area should be discouraged to make sure employees are aware of sounds around them.

 

Levels of Noise at Work Control

The Noise at Work control levels are:

1. Identify the hazard and assess the risk. This requires a specialist assessment using a noise meter.

2. Reduce the noise by:

  • designing systems with low levels of noise,
  • choosing machines with lower levels of noise,
  • enclosing equipment in sound proofing material,
  • lagging noisy ducting and pipes,
  • adding acoustic dampening panels on walls and ceilings,
  • having equipment properly and regularly maintained.

3. Reduce exposure to personnel (can the regular job be performed further away from the noise source).

4. Reduce the time the employee is exposed to noise.

5. Mark areas where there is a noise hazard as designated areas of protection.

6. As a last resort, if noise is unavoidable, provide Personal Protective Equipment (PPE) and organise proper training in its use.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Electricity in the Workplace

Most people use some form of electricity in the workplace daily. It is this familiarity that leads to carelessness with electricity and a disregard for the risks associated with it. Common issues are overloading electricity outlets, maintaining electrical equipment while it is still connected to the power supply, using plugs fitted with the wrong fuse and using equipment that does not have a fused plug fitted.

 

The Main Hazards with Electricity

Electricity can affect the worker in a number of ways:

  • Burns – electricity invariably burns (both entry and exit burns) and serious injuries can take a long time to heal.
  • Flash – electrical flashes are extremely bright and can burn or damage the eyes.
  • Shocks – electricity passing through the body can affect the heart. The consequences can be fatal.
  • Fires – a significant percentage of fires in the workplace are caused by electrical faults.

The risk of injury from electricity is strongly linked to where and how it is used.  In addition, there is greater risk in wet and/or damp conditions.

Once the human body comes into contact with the electricity, it can be impossible to let go of the source of electricity. If the person who is in touch with electricity gets touched by another person, the electricity will flow through the other person as well. The human body is a good conductor of electricity.

Every electric shock has the potential to kill!

 

Example of an Avoidable Accident

This incident was reported in the UK by the Health and Safety Executive.

Refrigerated display cabinet in a café

A 19-year-old man was electrocuted and killed when he touched a refrigerated display cabinet in a café. Investigation showed that the 13A plug had been incorrectly refitted to the cabinet’s main lead.

This meant the metalwork of the cabinet, which should have been safe to touch, was dangerously live at mains voltage. The man’s sister received two shocks from the cabinet before realising what had happened to her brother.

How to avoid similar accidents

You must ensure that your electrical installation and equipment is safe. Don’t cut corners – electrical installations must be installed by someone who has the necessary training, skills and experience to carry out the work safely.

 

Using Electrical Equipment Safely

To ensure safe use of electrical equipment:

  • ALWAYS – Check the equipment before use.
  • ALWAYS – Switch it off before unplugging the machine.
  • ALWAYS – Report all faults immediately and remove the equipment from use so no-one else can use it and get injured.
  • ALWAYS – Turn off the power when servicing electrical equipment.
  • NEVER – Handle the plug with wet hands.
  • NEVER – Use electrical equipment in wet conditions.
  • NEVER – Use electrical equipment unless you have been trained in its use.
  • NEVER – Overload electrical sockets.
  • NEVER – Overload extension leads (don’t plug in a combination of appliances that will exceed the maximum current rating for the lead).
  • NEVER – Attempt repairs unless qualified to do so.

 

Electrical Equipment Checks

Electrical cables, flexes, tools and equipment should be regularly checked and faults reported. Portable appliances should be checked periodically by a competent person.

A high percentage of faults with electrical equipment can be found by just looking at it. Everyone can play a role in improving safety by making quick visual checks of the equipment they use.

When carrying out preventive maintenance things to look for are:

  • Damage to cables, e.g. cuts and abrasions to the cable covering.
  • Damage to plugs, e.g. cracked casing or broken pins.
  • Loose cables, e.g. the outer covering of the cable not being gripped properly by the plug.
  • Signs of overheating, e.g. burn marks, staining or melted plastic.
  • Bare wires (none should be visible).
  • Coiled extension cables (make sure coiled extension cables are fully extended when in use).

If any of these faults, or any other unusual state of the equipment can be noticed, a qualified person should undertake any necessary repairs. No electrical equipment should be used if there is any sign of damage.

Additional information can be found on Health and Safety Authority website and their Electricity pages.

 

Dealing with Electrical Shock

A shock occurs when an electrical current passes through the body. This can interfere with the body’s own electrical impulses and may cause the heart or breathing to stop. Burns may be seen where the current enters and exits the body. There may also be deep internal damage which cannot be seen along the path of the current.

In the event of someone suffering an electric shock:

  • Seek help and do not put yourself at risk.
  • Make sure the contact with the electricity is broken before you touch the casualty. Turn off the power at the mains or unplug the appliance if possible. Do not touch anything that is metal or wet.
  • For high voltage supplies (such as overhead power lines) do not allow anyone within 18 meters of the casualty.
  • Once the power is disconnected safely, someone with first aid knowledge can give first aid. This may involve giving CPR or treating any burns or injuries.
  • Take the casualty to hospital for a check up (even if they have apparently recovered). Call 999/112 for emergency help if the casualty has been unconscious or has electrical burns.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

 

Ergonomics in the Workplace

Ergonomics in the workplace is one of the most overlooked workplace related hazards. Ergonomics is the science of fitting the task to the person by designing equipment and apparatus that fits well with the human body and the way that it moves. People come in all shapes and sizes. This is why all workstations should be designed with adjustable features. For example, adjustable seats and work platforms. This will enable the worker to work comfortably. Uncomfortable workstation can result in people stooping, stretching, overreaching, twisting, etc. This can cause muscle fatigue and strain. In addition, it can possibly cause longer term damage or deformation.

 

Risk Assessing the Ergonomics in the Workplace

Some of the factors that should be considered when risk assessing the ergonomics of work activities are:

  • The degree of force that is needed to do the job.
  • The environmental conditions – lighting and temperature.
  • Adequacy of rest periods.
  • The repetitiveness of the task.

Any machine expected to carry out repetitive motions must be regularly maintained and parts replaced as they wear out. Failure to maintain machinery may result in breakdown. People may also be expected to carry out similar repetitive tasks and suffer wear and tear as a result. This can cause them to suffer permanent damage and being unable to work. Any activity involving high repetitions should be looked at carefully and redesigned to avoid this as far as possible.

 

Enabling Ergonomics in the Workplace

Some of the effective measures to enable good ergonomic practices in the workplace are:

  • Alternating tasks and work breaks to avoid repetitive strain injuries.
  • Providing comfortable working temperatures and adequate ventilation.
  • Providing sufficient lighting and minimising glare by glazing windows or supplying blinds.
  • Minimising vibration.
  • Mechanising the task.
  • Regular health tests may be necessary and should be promoted by employers.
  • Training will also help employees to be more aware of good practice.

Occupations commonly associated with musculoskeletal problems are computer users, checkout operators, dentists and workers on production lines. One of the preventive measures that should be taken to prevent injuries at work is Manual Handling training. The eLearn Safety provides blended learning Manual Handling course has been designed by our qualified tutors to assist the employer to comply with current legislation.

 

Ergonomics in the Workplace and Display Screen Equipment

Display screens cause many instances of eye and wrist strain, back problems and headaches. Some additional insights into problems caused by use of display screens can be found in our blog entry Prolonged Static Sitting at Work from 26 May 2023.

Many of the problems associated with the use of display screens can be mitigated by implementing effective measures to enable good ergonomic practices as listed in the previous paragraph.

Some additional measures should be provided/enabled:

  • Eye tests for regular users of display screen equipment.
  • Sufficient desk space to provide support for the forearms and at a height where they are parallel to the surface of the desk.
  • Height adjustable seating with back support and footrests available if necessary to facilitate correct posture and comfort.
  • Height adjustable display screens to enable them to be positioned so the eyes are level with the top of the screen. They should have filters (if older models to minimise flicker and glare), screen controls and be placed to avoid reflections on the screen.
  • Adequate work space under the desk to allow the operator to change positions.
  • Regular training in recognising the adverse effects that incorrect use can have on the body and how to correct incorrect postures. eLearn Safety offers a fully online VDU/DSE course.

Staff experiencing discomfort and pain whilst using display screen equipment should report these issues to their employer as soon as they become aware of them. To help understand the use of VDU/DSE, the Health and Safety Authority has published useful Display Screen Equipment – (DSE/VDU) – Frequently Asked Questions.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

Asbestos in the Workplace

A number of Laws and Regulations have been made to ensure that workers are protected from risks related to exposure to Asbestos in the Workplace.

Asbestos is a name for a group of six naturally occurring mineral fibres. They are very strong and corrosive resistant material. However, it is now recognised that asbestos exposure can have serious health consequences.

Asbestos was extensively used as a building material in the Irish construction industry up until 1999. The majority if not all of the buildings built between 1940 to 1985 contain asbestos in some form. This is the time in which asbestos production peaked.

Asbestos has been widely used in construction for a variety of purposes. It was ideal for fireproofing and insulation, but its use was wider than this.  Asbestos was used in:

  • Fireproofing
  • Thermal Insulation
  • Electrical Insulation
  • Sound Insulation
  • Decorative Planters
  • Roofing Products
  • Flooring Products
  • Heat Resistant Materials
  • Gaskets
  • Chemical resistance

 

Dangers of Asbestos

Exposure of workers and the occupier to asbestos in the workplace can occur during uncontrolled asbestos removal or disturbance. Asbestos is the greatest single work-related cause of death from ill health. Past exposure is now responsible for thousands of people dying from asbestos related cancers every year.  This is expected to increase because it can take 15-60 years for the disease to develop and there is no cure.

According to the HSE Asbestos Fact Sheet, it is now recognised that the short-term high level inhalation exposure to asbestos has been associated with lung cancer, mesothelioma and pleural disorders. Further asbestos studies have shown that chronic inhalation is similarly detrimental to human health. The chronic exposure to asbestos is associated with asbestosis, pleural abnormalities, mesothelioma and lung cancer.

When materials containing asbestos are distributed, damaged or allowed to deteriorate, asbestos fibers can be released into the air. Asbestos fibers are potentially fatal if they are breathed in. Asbestos can also enter the human body through ingestion, though this is less common. The fibers can enter the lungs and damage them causing scars that stop the lungs working properly or even causing cancer.  According to the World Health organisation, asbestos is a proven carcinogen for which a safe air concentration cannot be established.

Anyone who disturbs asbestos containing materials, e.g., by working on them or near them, can be exposed to asbestos fibers. Those most at risk are those who carry out building maintenance and refurbishment work, e.g. electricians, joiners and heating engineers.

 

The Law and Asbestos in the Workplace

Duty holders need to manage the risk from asbestos in the workplace and make sure an assessment is made as to whether asbestos is, or may be present in the building. This includes where the asbestos is, or is assumed to be and what condition it is in. It should always be assumed that asbestos could be present until a full survey is done.

As with any work activity the requirements of the Safety, Health and Welfare at Work Act, 2005 (S.I. No. 10 of 2005) and the Safety, Health and Welfare at Work (General Application) Regulations, 2007 as amended (S.I. No. 299 of 2007 & S.I. No. 732 of 2007) apply and must be considered with respect to the protection of workers at the place of work. In addition, as regards specific work activities involving working with materials containing asbestos, particular attention must be taken concerning the requirements and control measures as outlined in the relevant asbestos related legislation. Such additional regulations are the Carcinogens Regulations, the Construction Regulations and Other Regulations (such as Confined Space, Work at Heights, etc).

 

Asbestos Awareness

According to the HSE Asbestos Public Health Advice, asbestos is present all around us. Traces can be found in small quantities in urban and rural air samples. We are all breathing in small amounts of asbestos fibers over our lifetimes.

Whilst we cannot always risk assess the environment around us, employers are required by law to identify all hazards in the workplace. This includes asbestos in the workplace. You can read more about workplace hazards in our Workplace Hazards blog from 24 February 2023. The Safety, Health and Welfare at Work Act, 2005 (No. 10 of 2005) imposes specific duties on employers to provide adequate information, instruction, training and supervision to their employees to ensure their safety, health and welfare at work.

The eLearn Safety online school offers a fully online Asbestos Awareness course. The aim of this course is to provide information on the identification and the prevention of occupational illness from exposure to respirable asbestos fibres.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

Safe Methods of Defrosting Frozen Foods

To ensure food which has been frozen before use is safe to eat, safe methods of defrosting frozen foods have to be considered.  There are some foods that are safe to cook straight from frozen. These are generally pre-prepared foods and manufacturer’s instructions will be on the packaging. All other foods will need to be defrosted thoroughly before cooking.

 

Problems with Defrosting Frozen Foods

Defrosting food can produce a number of problems. The most common is cross-contamination if defrosting was not done correctly. The other common problem is under cooking. Frozen food is frozen in its core and it might take longer before it is safely cooked. This can be forgotten during the meal preparation and the food can stay undercooked.

The liquid from the food, a result of defrosting, that comes off raw meat can contain high levels of harmful bacteria. This can contaminate ready to eat foods if not treated carefully. The liquid has to be discarded carefully. All surfaces with which it came into contact must be cleaned and disinfected thoroughly. Protection of food whilst defrosting is very important. The food must be protected from physical and chemical contamination.

 

Tips for Defrosting Food Safely

To ensure safe food, defrosting must be carried out in appropriate conditions. The food can be defrosted in:

  • Defrosting Unit.
  • A Microwave Oven with Defrosting Cycle.
  • A Refrigerator.
  • Under Cold Running Water.

The food can be defrosted in the fridge. A space should be made on the bottom shelf for frozen food. The frozen food should also be ideally sealed so that there is no chance of accidental contamination of other foods during handling. The fridge defrosting method will ensure that the food stays at a safe temperature as the food thaws.

The food can be defrosted under cold running water. As the outside of the food will defrost faster than the centre, this will help to keep it cool. If food is defrosted using cold running water, it must be placed in a container that does not retain water. For example, the colander can be used as a container.

Food can also be defrosted in the microwave. The care, however, must be taken to avoid cooking the surface while defrosting the centre.

Some ready-to-eat foods, such as cakes, may be safely defrosted at room temperature, following either the manufacturer’s instructions or the guidelines in the Food Safety Management System.

 

Why is Applying Safe Methods of Defrosting Frozen Foods Important

When the food is defrosted, it should be cooked as soon as possible after it has been defrosted. It is very important, however, to check that the food is completely defrosted before cooking. The food should be checked by sight. It should also be checked with fingers or a skewer. If any ice crystals remain inside the food, for example in the body cavity of the chicken, then the food needs to be allowed to thaw for longer. If the cooking process begins before the centre of e.g., a joint of meat has fully thawed, then while the outside will cook perfectly, the centre may not reach a temperature high enough to kill bacteria.

 

Key Points to Remember

When defrosting food, it is useful to remember these key points:

  • Keep food that is defrosting separate from other food and equipment to avoid cross-contamination.
  • Defrost small pieces of raw food in a container at the bottom of the refrigerator.
  • make sure food is defrosted all the way through and there are no ice crystals in the food.
  • Defrosting can be done using clean, cold water. If food is defrosted using cold running water, it must be placed in a container that does not retain water. Avoid splashing the contaminated water onto other food surfaces.
  • If using a microwave, make sure the food is defrosted all the way through.
  • Never refreeze a food product unless you have cooked it first.

SafeFood, an organisation that promotes food safety and provides nutritional advice has some additional useful tips on how to defrost food safely in their article How to defrost food safely.

 

Online Food Safety Training

Please remember – it is a legal requirement that staff who are involved in a food environment are trained and/or supervised commensurate with their work activity!

Myelearnsafety offers fully online Food Safety (HACCP) courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

First Aid in the Workplace

Under Irish Health and Safety Law (Chapter 2 of Part 7 of the General Application Regulations 2007), employers have a responsibility to make sure that the First Aid arrangements in the workplace are sufficient. First Aid can mean anything from providing a treatment of minor injuries (e.g., minor cuts) to treatment of life threatening injuries (e.g., heart attack). First Aid is immediate treatment given to save life and stop conditions getting worse. The First Aid in a workplace setting is usually referred to as Occupational First Aid.

When the First Aid is in question, the employer must:

  • Carry out an assessment to decide where, how many and what type of First Aiders are needed.
  • Provide First Aid training and refresher training where required.
  • Provide sufficient First Aid Kits and equipment for the workplace.
  • Make sure all staff are aware of how and where to get First Aid treatment.

The First Aid Risk Assessment will help to decide what type of First Aid materials and/or equipment is required. In addition, it will also tell us how many if any First Aiders are required. The number of the First Aiders will depend on the size of the organisation and any specific hazards in the workplace. In some cases, fully equipped and stocked First Aid rooms must be provided.

 

Assessing Needs for Provision of  First Aid in the Workplace

All employers must carry out a First Aid needs assessment that should consider:

  • The nature of the work and workplace hazards and risks.
  • The size of the organisation.
  • The nature of the workplace.
  • The organisation’s history of accidents and illness.
  • The needs of travelling, remote and lone workers.
  • Work patterns such as shift work.
  • The distribution of the workforce.
  • The remoteness of the site from emergency medical services.
  • Employees working on shared or multi-occupied sites.
  • Annual leave and other absences of First Aiders
  • First Aid provision for non-employees (visitors, clients, etc.).

Considering the nature of the work and workplace hazards and risks can be complicated areas of the First Aid needs assessment. For example, the employer should evaluate risks associated with the workplace and possible injuries related to these risks. These should be then evaluated against type of First Aid treatment that may be required:

  • Manual Handling – fractures, lacerations, sprains and strains.
  • Slips, Trips and Falls – fractures, sprains and strains, lacerations.
  • Use of Machinery – crush injuries, amputations, fractures, lacerations and eye injuries.
  • Working at Height – head injuries, loss of consciousness, spinal injury, fractures, sprains and strains.
  • Chemicals – poisoning, loss of consciousness, burns and eye injuries.
  • Electricity – electric shock and burns.
  • Workplace Transport – crush injuries, fractures, sprains and strains and spinal injuries.

The completed Assessment will provide a broad indication of the numbers of Occupational First Aiders that should be provided in different circumstances.

 

Recommended Numbers of Occupational First Aiders

After the Risk Assessment has been completed (as a part of the Safety Statement), it will identify the need for the Occupational First Aiders. It is very rare that the Assessments identify that first aiders are not required. The exact numbers of First Aiders in majority of workplace settings can be determined as follows:

  • Up to 99 employees present at any one time – 1 First Aider present at all times if Safety Statement and Risk Assessment shows it to be necessary.
  • 100 – 399 – 1 First Aider must be present at all times.
  • 400 – 699 – 2 First Aiders must be present at all times.
  • More than 700 – 1 additional First Aider for every 300 employees or part therof.

These numbers should be doubled, however, if the workplace is more than 1 hour away from the professional medical assistance. In addition, some other workplaces such as factories, construction sites, surface mines and quarries, and underground mines have different First Aiders numbers requirements. These are outlined in Guide to the Safety, Health and Welfare at Work (General Application) Regulations 2007 – Chapter 2 of Part 7: First-Aid.

It is important to remember that the First Aider must be present on site at all times. For example, if the First aider is on holiday, they must be replaced by another First Aider.

 

Training of First Aiders

The Pre Hospital Emergency Care Council (PHECC) First Aid Response (FAR) training standard is the recognised standard for Occupational First Aid in the workplace. Whilst the numbers of required First Aiders as listed in a previous section are recommended, the employers are always encouraged to train as many as possible employees in the First Aid. The initial First Aid training takes 3 full days classroom delivery and the Certification is valid for 2 years. After 2 years, a 2 day refresher classroom delivery can be completed. Successful completion of a refresher training is valid for 2 years. However, it is always recommended to refresh First Aid training knowledge on a more often regular basis.

There is a wealth of evidence on the severity of first-aid skill-fade. To prevent this, online training is a convenient and user friendly way to keep first-aid skill-memory up to date. eLearn Safety offers fully online First Aid relevant courses, such as Common Medical Emergencies: Asthma, Medical Emergencies: Heart Attack, and Paediatric First Aid just to name a few.

Whilst some workplaces require having fully trained Occupational First Aiders on site, other employees can be trained to a lower level of skill in first-aid (e.g. Basic First Aid, CFR-C, etc.).

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie