Asbestos in the Workplace

A number of Laws and Regulations have been made to ensure that workers are protected from risks related to exposure to Asbestos in the Workplace.

Asbestos is a name for a group of six naturally occurring mineral fibres. They are very strong and corrosive resistant material. However, it is now recognised that asbestos exposure can have serious health consequences.

Asbestos was extensively used as a building material in the Irish construction industry up until 1999. The majority if not all of the buildings built between 1940 to 1985 contain asbestos in some form. This is the time in which asbestos production peaked.

Asbestos has been widely used in construction for a variety of purposes. It was ideal for fireproofing and insulation, but its use was wider than this.  Asbestos was used in:

• Fireproofing
• Thermal Insulation
• Electrical Insulation
• Sound Insulation
• Decorative Planters
• Roofing Products
• Flooring Products
• Heat Resistant Materials
• Gaskets
• Chemical resistance

 

Dangers of Asbestos

Exposure of workers and the occupier to asbestos in the workplace can occur during uncontrolled asbestos removal or disturbance. Asbestos is the greatest single work-related cause of death from ill health. Past exposure is now responsible for thousands of people dying from asbestos related cancers every year.  This is expected to increase because it can take 15-60 years for the disease to develop and there is no cure.

According to the HSE Asbestos Fact Sheet, it is now recognised that the short-term high level inhalation exposure to asbestos has been associated with lung cancer, mesothelioma and pleural disorders. Further asbestos studies have shown that chronic inhalation is similarly detrimental to human health. The chronic exposure to asbestos is associated with asbestosis, pleural abnormalities, mesothelioma and lung cancer.

When materials containing asbestos are distributed, damaged or allowed to deteriorate, asbestos fibers can be released into the air. Asbestos fibers are potentially fatal if they are breathed in. Asbestos can also enter the human body through ingestion, though this is less common. The fibers can enter the lungs and damage them causing scars that stop the lungs working properly or even causing cancer.  According to the World Health organisation, asbestos is a proven carcinogen for which a safe air concentration cannot be established.

Anyone who disturbs asbestos containing materials, e.g., by working on them or near them, can be exposed to asbestos fibers. Those most at risk are those who carry out building maintenance and refurbishment work, e.g. electricians, joiners and heating engineers.

 

The Law and Asbestos in the Workplace

Duty holders need to manage the risk from asbestos in the workplace and make sure an assessment is made as to whether asbestos is, or may be present in the building. This includes where the asbestos is, or is assumed to be and what condition it is in. It should always be assumed that asbestos could be present until a full survey is done.

As with any work activity the requirements of the Safety, Health and Welfare at Work Act, 2005 (S.I. No. 10 of 2005) and the Safety, Health and Welfare at Work (General Application) Regulations, 2007 as amended (S.I. No. 299 of 2007 & S.I. No. 732 of 2007) apply and must be considered with respect to the protection of workers at the place of work. In addition, as regards specific work activities involving working with materials containing asbestos, particular attention must be taken concerning the requirements and control measures as outlined in the relevant asbestos related legislation. Such additional regulations are the Carcinogens Regulations, the Construction Regulations and Other Regulations (such as Confined Space, Work at Heights, etc).

 

Asbestos Awareness

According to the HSE Asbestos Public Health Advice, asbestos is present all around us. Traces can be found in small quantities in urban and rural air samples. We are all breathing in small amounts of asbestos fibers over our lifetimes.

Whilst we cannot always risk assess the environment around us, employers are required by law to identify all hazards in the workplace. This includes asbestos in the workplace. You can read more about workplace hazards in our Workplace Hazards blog from 24 February 2023. The Safety, Health and Welfare at Work Act, 2005 (No. 10 of 2005) imposes specific duties on employers to provide adequate information, instruction, training and supervision to their employees to ensure their safety, health and welfare at work.

The eLearn Safety online school offers a fully online Asbestos Awareness course. The aim of this course is to provide information on the identification and the prevention of occupational illness from exposure to respirable asbestos fibres.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

Prolonged Static Sitting at Work

Prolonged static sitting at work has become a norm in the modern economy and the way many jobs are performed. The rise in home-working due to the recent COVID-19 pandemic has probably exacerbated the situation as many employees are not commuting to work anymore. Whilst commuting to work is generally considered a ‘lost time’, this is not the case if the commuting was done through walking, cycling or any other physical activity. In this case, the time spent on commuting counts towards personal physical activity which has numerous positive health effects.

Prolonged static sitting at work, however, brings numerous negative health effects.

 

What is Prolonged Static Sitting at Work

Prolonged sitting can be defined as being sedentary for 2 hours or longer at a time. This has three main characteristics:

• low energy expenditure;
• a seated body posture;
• static loading (physical exertion to maintain the same position).

The European Agency for Safety and Health at Work published an insightful report Prolonged static sitting at work: health effects and good practice advice which delves into the issues associated with prolonged sitting at/for work.

 

Tips for Mitigating Prolonged Sitting Risks

To ensure a good sitting position at work, a number of factors must be looked at. These factors according to the Canadian centre for Occupational Health and Safety are:

• workplace design (including tasks, workstation, and chair design),
• job design,
• education and training.

None of these factors are more important than the other. To ensure a best possible sitting at work arrangement, all these factors must be looked into. The eLearn Safety VDU/DSE course provides invaluable employee training that explores issues arising from tasks related to sitting; and it looks into workstation arrangement and chair adjustment.

Some of the tips to prevent adverse effects associated with sitting at work are:

• Stand up and walk every hour for a few minutes.
• If there are sit-stand desks, alternate posture regularly between the two. A typical example is to sit for 30 minutes, stand for 25 minutes and walk for 5 minutes every hour.
• Try to change position frequently between sitting, standing and moving around.
• When sitting, change position frequently – so called ‘dynamic sitting’.
• Take your lunch away from your work desk.
• Provide high tables in meeting spaces and so people can stand for meetings or breaks.
• Create a climate and culture in the organisation that promotes more active working.
• Drivers should take plenty of short breaks.
• Drivers should step out of the cab or vehicle whenever possible, take a short walk during stops and do some stretches.
• Drivers, pilots and office workers should move their feet from heel to toe when sat down to encourage blood circulation.

 

The Law

The Safety, Health and Welfare at Work, (General Application) Regulations 2007, Chapter 5 of Part 2 outline the requirements that must be adhered to in relation to Display Screen Equipment and Workstation. According to the Regulations 2007, the workstation is defined as

an assembly comprising display screen equipment, which may be provided with a keyboard or input device or software, or a combination of the foregoing, determining the operator and machine interface, and includes—

(a) a work chair and work desk or work surface,

(b) any optional accessories and peripherals, and

(c) the immediate work environment of the display screen equipment.

The employer must carry out a Risk Assessment of employee workstations and implement relevant measures to mitigate risks. This information must be collated to employees. The Risk Assessment is an ongoing activity, and all workstations should be regularly assessed to reflect any change of equipment and/or emergence of new technologies and practices that might mitigate some of the risks associated with the use of workstations. In addition, the employer must provide relevant VDU/DSE training in the use of to them applicable workstations. This training must take place before the work commences and/or whenever there is a modification of the workstation.

 

Preventing Adverse Effects of prolonged Sitting

Risks associated with prolonged sitting are numerous. There is ample evidence that suggests that this can be prevented by light regular physical exercise. At least 30 minutes of daily exercise is recommended. This can be any activity, such as walking, jogging, cycling, or exercising at home or at the gym.

Regular exercise can keep people fit and it burns calories. The majority of people with daily exercise routines also report improved sleep and feel more rested after waking up. In addition, regular exercise promotes a healthy heart and keeps weight down. This in turn reduces risk of a number of poor health conditions, such as various musculo-skeletal disorders (low back pain; neck and shoulder complaints, etc.), cardio-vascular diseases, diabetes, high cholesterol and even cancer.

The Health Service Executive (HSE) published useful Physical Activity Guidelines to consider for getting healthy and staying healthy.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

Workplace Accidents and Their Prevention

Workplace accidents and their prevention are key priorities of anyone at work – employers and employees alike. Prevention of workplace accidents helps organisations prevent injuries and ill-health at work, damage to property, lost of productivity. In addition, workplace accident may cause significant legal issues. whilst accidents are usually regarded as unplanned and uncontrolled events, this is often not the case,. The truth is that many accidents can be avoided. An accident is an incident that may cause:

• Major or serious personal injuries or damage to the workplace.
• Minor damage or injuries.
• A near miss.
• Death.

 

Main Factors That Cause Accidents in the Workplace

Each workplace has certain hazards associated with its operation. Being aware of these hazards and the control of associated risks is essential for accident prevention. You can find out about workplace hazards in our Workplace Hazards blog entry form 24 February 2023.

There are three factors that can cause problems in the workplace:

• Occupational – injury or illness directly connected to work related tasks such as lifting and carrying or using tools and equipment.
• Environmental – conditions in the workplace such s heating, ventilation, lighting and space that can affect the safety of workers.
• Human – lack of training, inexperience, complacency, disregard for safety rules, haste, distraction and tiredness are examples of human factors that can contribute to accidents, Unfortunately many human hazards are very difficult to control. This is why relevant training and prevention is extremely important. For training courses to that might help with Human Hazard prevention, please check our online training school eLearn Safety.

 

Investigation of Workplace Accidents and Their Prevention process

It is vital that all managing staff creates a positive attitude to health and safety matters and to make sure all members of the team take health and safety seriously. Everyone in the workplace must follow safe working procedures and must report safety issues and defects.

Employers need to be made aware of occurrences so they can be prevented from happening again. All accidents, including near misses and all incidents and ill-health must be reported. This is so these events could be investigated and corrective action  taken. This is however not to ‘punish’ anyone involved, but to prevent the accident happening again and to learn from it. Employees have a legal duty to report occurrences to their employer.

Accidents and incidents can be reported in the form of of an Accident Book, which should contain, for example, the following information:

• Date and Time of Injury.
• Name of the Injured Person.
• A description of the accident and Nature of the Injury.
• What Action was Taken and by Whom.
• Final Outcome (e.g., employee sent home, hospitalised, etc.).
• Person reporting an Injury (if it is not the injured person).

 

Accident and Dangerous Occurrence Reporting

Under the Safety, Health and Welfare at Work (General Application) Regulations 2016 all employers and self-employed persons are legally obliged to report the injury of an employee as a result of an accident while at work. Injuries must be reported if an employee is unable to carry out their normal work for more than three consecutive days, excluding the day of the accident.

 

How to Report an Injury

The injury at the workplace can be reported:

• HSA Online Reporting Platform
• By filling Schedule 7 Notifiable Incident Form and sending it by An Post.

 

Workplace Injuries, Illnesses and Fatalities (2020–2021)

The number of fatal incidents for 2020 was reported as 54. There were 38 work-related fatal incidents in 2021.

In 2021, 8,279 non-fatal injuries were reported to the Authority, an increase of 8% from the 7,652 reported in 2020. This may be due in part to revived economic activity in 2021 following the partial relaxation of COVID-19 restrictions. Of the 8,279 non-fatal injuries reported in 2021, 97% related to workers. The highest number was reported in the NACE economic sector of Human Health and Social Work Activities, which accounted for over 22% of all incidents. For non-worker incidents, the highest number was reported in Wholesale and Retail Trade (118) representing 46% of all non-worker injuries.

Workplace Injuries, Illnesses and Fatalities (2020–2021) – Full Report.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Personal Protective Equipment (PPE)

Personal Protective Equipment, or short PPE, is according to the Hierarchy of Risk Controls the last control method used to control risk. According to the Health and Safety Authority (HSA):

“Personal Protective Equipment (PPE) means any device or appliance designed to be worn or held by an individual for protection against one or more health and safety hazards. Respiratory Protective Equipment Respiratory Protective Equipment (RPE) is a particular type of Personal Protective Equipment, used to protect the individual wearer against inhalation of hazardous substances in the workplace air.”

In other words, PPE includes any equipment or clothing intended to be held or worn by people at work to offer protection against identified problems.

Where more than one item of PPE is required to be used simultaneously, e.g. hearing defenders and safety helmet, the items must be compatible and must not interfere with the level of protection offered by the individual items. Many manufacturers offer integrated systems which might be used provided they abide to certain rules.

Personal Protective Equipment (PPE ) must be provided free of charge by employers – employers cannot pass on to employees any financial costs associated with duties relating to safety, health and welfare at work. 

 

Personal Protective (PPE) Rules

Safety, Health and Welfare at Work (General Application) Regulations 2007 , Part 2 Chapter 3 covers Use of Personal Protective Equipment at work. Broadly speaking all Personal Protective Equipment (PPE) must:

• Be suitable to protect against the risk and fir properly.
• Give adequate protection.
• Be compatible with other equipment worn.
• Carry a CE mark.
• Be cleaned and maintained regularly and be replaced if worn or broken. This includes changing filters, eye shields, etc. as necessary.
• Be thoroughly cleaned or washed, before removal if contaminated to avoid accidental contact by user.
• Be correctly stored in a well ventilated and clean area.
• Be worn (employers may take disciplinary action against employees who do not wear required PPE).

Personal protective Equipment (PPE) must meet certain EU requirements and standards which confirm it meets specified safety and various test criteria. Generally PPE that carries CE mark will meet these criteria.

European Union (Personal Protective Equipment) Regulations 2018 provide that PPE may not be placed on the market or brought into service unless it complies with basic health and safety requirements. It is deemed to be in conformity with the Regulations if it bears the CE mark”.

It should always be remembered that PPE does not change the hazard in any way. Personal Protective Equipment (PPE) offers protection for the wearer only.

 

Types of Personal protective Equipment (PPE)

When a Risk Assessment indicates that PPE should be used, it is important to choose the right type to protect different parts of the body.

Some of the types of Personal Protective Equipment (PPE) are:

• Helmets – protects head. Usually used in construction, mining and other groundwork or work where there are risks of falling objects.
• Visors and face shields – protects face. Usually used by welding and foundry workers (molten metal splashes).
• Goggles and glasses – protects eyes. Usually used for welding work with lasers, woodwork, or all these activities where there is a risk of flying fragments or chemical splashes.
• Plugs, muffs and helmets – protects ears. Usually used for work in noisy environments, e.g. heavy duty drilling and/or hammering and noisy machine rooms.
• Gloves (rubber, chain mail) – protects hands. Used for work involving the handling of hazardous substances, chainsaws, knives saws, hot/cold items, rough wood, etc.
• Respiratory Protective Equipment (RPE) – used to protect respiratory system. Work in unhealthy atmospheres and/or involving exposure to hazardous substances and work producing substantial quantities of dust. Respiratory Protective Equipment (RPE) not worn or selected appropriately is totally ineffective. In addition, it may give the user a false sense of protection. For further guidance or RPE see Health and Safety Authority – Respiratory Protective Equipment.
• Clothing (high visibility/thermal, cut resistant, safety harness, etc.) – protects the body. Usually used for work involving risks of splashing or other contamination. It is also used for work with chainsaws (arms and legs) or ionising radiation, etc. It is also used for work where there is a risk of falling.
• Safety boots and gaiters (toe protectors, insulating footwear) – usually used for work where there is a risk of splashing or of falling objects. In addition, it is used for work with live electricity.

Personal protective Equipment (PPE) should only be used if the hazard cannot be controlled any other way.

 

Training in Use of Personal Protective Equipment (PPE)

All employees required to use Personal Protective Equipment (PPE) must be provided with suitable information, instruction and training (including training in the use, care or maintenance of PPE) to enable them to make proper and effective use of any PPE provided for their protection.

 

Further Guidance on the Requirements of the Personal Protective Equipment Regulations

For additional guidance on the requirements of the Personal Protective Equipment Regulations, please refer to the relevant Personal Protective Equipment Guidance to the Safety, Health and Welfare at Work (General Application) Regulations 2007.

 

For online Health and Safety training solutions, please check our Online Health and Safety Training portal!

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

Workplace Hazards

Workplace hazards are anything even remotely that has the potential to cause harm to a person.

Under the Safety, Health and Welfare at Work Act, 2005 an employer is required to carry out risk assessments, prepare a safety statement and implement what it contains. Health and Safety Authority inspectors visiting workplaces will want to know how safety and health is being managed. If they investigate an accident, they will scrutinise the risk assessments, safety statement, and the procedures as well as the work practices.

 

The Purpose of the Risk Assessment

The Risk Assessment should identify all workplace hazards, quantify the risks and introduce control measures to reduce the risk of injury or illness to the workforce. Some additional legislation also requires employers to conduct specific risk assessment for specific common hazards such as manual handling, hazardous substances, display screen equipment and fire safety.

 

What is Risk Assessment

A risk assessment is simply put a careful examination of workplace hazards and what could cause harm to people. This is so you can consider whether you have taken enough precautions or should you do more to prevent harm. Risk Assessment will help identify what could go wrong, how likely it is to happen and how serious the result could be. The employer then needs to put control measures in place to prevent the problem occurring.

 

What are Hazard and Risk

Hazard and Risk have two quite distinct meanings.

• Hazard – means something that has the potential to cause harm or damage.
• Risk – means the likelihood of the harm or damage being realised. The risk is a combination of chance (or likelihood) and severity, and how likely is that something is going to happen.

For example, a bottle of bleach at work falls under category of workplace hazards. If the bottle contains hazardous liquid, bur locked in the cupboard it does little harm. The risk increases when the bottle is used. When people are working safely there is less chance that an accident will occur.

Chance is a measure of how likely it is that an accident could happen.

Severity is a measure of how serious an injury or health effect could be, as a consequence of unsafe working or of an accident. The severity can be influenced by the following:
• the environment,
• the number of people at risk, and
• the steps already taken to control the hazard.

 

Five Steps of a Risk Assessment

Generally speaking, identifying and managing risks can be done in five steps:

1. Identify the Workplace Hazards

For example:

Slips and Trips – consider floor surfaces, housekeeping and different floor levels.

Working at Height – e.g. decorations using ladders and construction workers on scaffolding.

Fire Hazards – e.g. flammable substances and sources of ignition.

Moving Vehicles – e.g. forklift trucks and reversing lorries.

Dust – such as wood dust in a sawmill or flour in a bakery.

Hot Liquids – e.g. pans of hot water or oil in a kitchen.

 

2. Decide on who may be harmed and how

It is not just person conducting the task that may be affected but anyone nearby. For example, builders working on scaffolding above a public walkway may inure pedestrians if equipment or materials are dropped. Some employees will need a separate Risk Assessment, e.g. those who are more vulnerable, such as pregnant workers and young, inexperienced staff.

 

3. Evaluate the risk and decide on precautions

Consider the consequences of injury or harm. Could someone be seriously inured or even killed? Could lots of people be affected. How likely is it to occur? If the answer to any of these questions is yes, then these hazards should be addressed as a priority and further controls put in place to reduce the risk to an acceptable level, using the hierarchy of control (see below).

 

4. Record your significant findings and implement them

It is a legal requirement that businesses formally record their significant findings. It is important not only to implement the controls you identified, making sure staff are trained in the new procedures, but to check to make sure they are followed correctly. Some health and Safety training can be delivered on-line. For solutions, please check our Online Health and Safety Training portal myelearnsafety.com

 

5. Review and update Risk Assessments as necessary

Reviews should take place when:

• Procedures are revised.
• Workplace layout is reorganised.
• New machinery is installed.
• An accident or near miss occurs.
• The law changes.

Reviews should also take place on a regular basis, possibly annually, just to make sure nothing has been missed and to identify new techniques or scientific developments that could be introduced to improve safety.

 

Hierarchy of Control

When considering control measures there is a scale of preference. the higher up the chart, the better or more preferable the method. Some measures will work for some tasks or activities and some for others, but not all will be suitable.

The following is a hierarchy of controls:

1. Eliminate.

If something is hazardous, the most effective option is to remove the hazard altogether if possible.

2. Substitute.

If hazard cannot be eliminated, can it be substituted for something safer?

3. Implement Engineering Controls.

For example;

• Equipment – using work equipment as a preventive measure, e.g. to prevent falls from height.
• Guards – placing or replacing guarding controls.
• Insulation – an excellent method of noise control.
• Ventilation – removing hazardous dust and fumes from the workplace using additional machinery if necessary.
• Maintenance – making sure all equipment is well serviced and maintained.

4. Administrative Controls.

Procedures needed to work safely, e.g. limiting the amount of time the worker is exposed to a hazard, increasing safety signage, conducting risk assessments.

5. personal protective Equipment (PPE)

Equipment or clothing provided to protect an employee against risks to their health and safety. Must only be used once all other measures have been tried and found unsuitable.

 

Some hazards are obvious, such as unguarded moving parts of machinery, dangerous fumes, electricity, working at heights, moving vehicles or moving heavy loads. Less obvious, but at the root of many accidents, are hazards presented by untidy workplaces and poor maintenance. In the case of other hazards, such as excessive noise or exposure to chemicals, it may take months or even years before ill health materialises.

When deciding on the controls, you should consider the general principles of prevention. These are a hierarchy of controls that set out how to manage hazards. The focus should be to get rid of the hazard, so that people are protected. If this is not possible then you should work through the principles until you have made it as safe as reasonably practicable. Your reliance on personal protective equipment (PPE) should be one of the last steps in the process (not the first).

Always consider give training and instruction. Once you have assessed the risks and decided on your controls in line with the principles above, you will need to tell your employees about them and to make sure that they are competent to comply with them.

 

A Guide to Risk Assessments and Safety Statements

A guide to Risk Assessment and Safety Statements is a very useful publication by the Health and Safety Authority of Ireland (HSA), national body in Ireland responsible for the enforcement of workplace health and safety law, the implementation of a number of chemicals regulations, and accreditation. The information contained in the Guide can help an employer or self-employed person to manage safety and health in their workplace(s) by preparing risk assessments and a safety statement.

 

For online health and Safety training solutions, please check our Online Health and Safety Training portal.

Myelearnsafety offers fully online health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Online Health and Safety Training and its Benefits

Online Health and Safety training offers a strong return on investment for employers and a quick way to get employees up to date with workplace safety. Online courses are also tailored to specific areas of workplace safety. They can ensure employees are getting the exact information they need to do their job safely. In this article, we take a closer look at the benefits of online training for workplace safety.

 

The Importance of Online Training for Workplace Safety

Studies show online education is growing by 5-10% each year as more and more employers move their training methods online. According to the Irish Central Statistics Office (CSO) there was a sharp increase in the use of education portals/websites during COVID-19 with over one fifth (21%) Communicating with instructors or students using educational websites/portals, an increase of seven percentage points in 2019. These numbers remain high even after the COVID-19 pandemic. With the rise of digital technology in all areas of our lives this trend is far from declining.

Online Health and Safety training is a convenient way for staff to learn about their safety in the workplace. It removes many constraints which often hinder classroom training. This type of training is also very specific. It usually focuses on the precise lessons needed to stay safe in the workplace. From food handling and fire safety to workplace stress and working at heights, such online courses are always relevant to the workplace and ensure employers are abiding by certain laws and regulations.

Let’s take a look at some of the main benefits of online training.

 

7 Key Benefits of Online Training for Workplace Safety

1. Online Training Draws from High Quality Resources

Online training usually draws inspiration from the best interactive experiences online and incorporate these learnings into an online course. As a result, online training can sometimes include video conferencing or webinars and other opportunities which enable staff to engage remotely. Simply put, this consistent high quality and extent of resources is rarely guaranteed in the classroom.

2. Learning Practical Skills for Real World Experience

Employees develop soft skills through online training and practical lessons which they can put into practice at work. These lessons often come from real experience which can feel more relevant than the theory which you might hear about in a classroom. Online courses also use simulations, scenarios and multiple choice questions to ensure these lessons are always relevant to real world scenarios. This also highlights the objective of online training – to give employee the exact education they need to know to do their job safely.

3. Employees Often Retain More through Online Training

Research shows how many employees are likely to forget what they learn in the classroom. It makes sense when you think back to school days and just how little algebra or poetry you might remember! Memory retention is boosted by relevant experiences which can be applied straight away. With this in mind, online training is often split into areas of knowledge and structured to increase relevancy. This increased relevancy means employees will more likely learn and recall the contents of an online course than they might in a classroom.

4. Online Courses Can Be Scheduled for Any Time/Place

Standard classroom training is always set at a specific time but co-ordinating this time is near impossible in such a fast-moving world. There is also a time loss for going to and from a classroom. Many employees are likely to feel restricted in a classroom environment. Online training can take place at any time and enables employees to undergo the training at their own pace. It’s a win-win situation for both employers and employees. In addition, it also removes the requirement for having a classroom to facilitate the training.

5. Immediate Access to Support and Resources

Online training provides immediate access to a large number of resources which allows them to find answers at the time of learning. Classroom training takes place in a specific location where employees are most often unable to access training resources in real time. This means employees don’t need to wait until the next class to ask questions and can address any immediate challenges or concerns before moving on with the training. Online training can use forums or social media groups to provide extra support and provide employees with a place whether they can share tips or ask questions.

6. Online Training is Designed for Different Learning Preferences

Every audience consists of different people with varying abilities and backgrounds. However, more recent generations have become accustomed to smart technology and the online world. These employees are also likely to have acquired skills through Google, YouTube and apps in the past and appreciate this method of learning. This is why the rate of attention and engagement with online training is often said to be higher than a classroom. Online training is designed to cater to all learning preferences.

7. High Levels of Engagement and Responsibility

Some online training courses are gamified which means they feature levels, rewards and certain mechanics which encourage progress. These courses seek to encourage the learner to progress and keep going until they complete each lesson. They can also monitor performance along the way and feel more invested or responsible for participating in the course. It is this high engagement which should be attractive to employers and the fact they can outsource this time consuming process to a trusted online training platform.

 

Working with a training company

Working with an online training platform can help employers lighten the load and allow the experts to take care of the training. However, it’s important to choose a platform which abides by laws and regulations and incorporates these requirements into the online training. For instance, MyElearnSafety offer courses online health and safety training for Food Safety which adhere to the principles of the internationally recognised Hazard Analysis and Critical Control Points (HACCP). It also offers Fire Safety Awareness, Manual Handling Awareness, Paediatric First Aid just to name a few.

Check out MyElearnSafety today and we can get everyone up to speed on their workplace safety!

Recognising and Promoting Positive Safety Behaviour

For employers there is a legal duty to provide a safe place of work for their employees wherever the place of work maybe. In these COVID-19 times this can and does in many cases mean remote working from home. Health and Safety requires all the stake holders to actively participate in safe work practice and to understand what is involved to create a safe place to work. Giving staff the information and tools to do this is a first step. When on-boarding staff, it is important to carry out a risk assessment that is personal to the employee and their role. Making sure they have the correct training, and any necessary certification is the next step and thereafter the employer needs to monitor compliance and performance.

 

 

An effective way of doing this is through an online solution that provides the records and training required. Having such a system that provides 24/7 access to information you can then go further to promote positive safety behaviour. By encouraging ongoing engagement with the core safety information and training you can see which employees are performing well and keeping engaged and up to date. You can incentivise staff to make sure they are aware of safe behaviour and you can encourage them to report unsafe issues that may arise.

It is true that a safe place of work is likely to be a more productive environment for the employee which all contributes to your bottom line. Promoting positive safety behaviour will reduce the risk of accidents and incidents and will reduce days lost to illness or accidents. It will also help you protect your company from the negative publicity and potential legal action arising from an accident in the workplace. Everyone in a working environment requires knowledge and training on safety behaviour and how to ensure a safe and healthy workplace. A desk bound job requires proper ergonomics and knowledge regarding breaks and what to do in an emergency. Even working in the home carries significant risks if a workstation is not correctly set up.

Our pattern and location of work is changing rapidly as a result of the pandemic and is likely to change permanently with a much larger degree of blended work where people attend the office on a part time basis. In this scenario it will become increasingly important to promote positive safety behaviour as the employer will have less control of the work environment while still being legally responsible for it. Even more reason to recognise and promote positive safety behaviour.

Myelearnsafety.com can provide more information on this topic as well as providing a solution to safety training and compliance monitoring. We would be delighted to hear from you with any of your concerns or problems.

Article  by Vincent Traynor

Please feel free to contact Cormac on 01 278 1938 or cormac@elearn.ie,  if you would like to discuss your health and safety needs further,  or take advantage of a complimentary course.

Managing Mental Health for Remote Workers

 

Timely advice has been published by the Health and Safety Authority (HSA) on virtual assessment of working conditions for remote workers. While there is concentration in the advice on the physical conditions and equipment needed it is a good idea to consider how to help reduce stress for employees as part of a health and safety policy in the workplace.

 

Working in an office or remotely can produce a stressful environment for mental health. An employer is obliged under legislation to provide a safe place of work for their employees and employees are entitled to expect that provision is made by their employers regardless of where they are working. Mental health is an important part of a safe place to work. Mindfulness Practice can help reduce stress. A simple way to help reduce stress would be to provide access to a course on mindfulness practice.

 

People working remotely are missing out on the normal social interaction in the office environment which can create its own stress. People working in an office environment are subject to a different set of circumstances. Both can benefit from Mindfulness practice. Myelearnsafety.com provides a mindfulness practice course that can give you a simple guide to the topic and help start you on the way to reduce stress in your workplace, particularly if you are working remotely.

 

Other courses will also help you assess your workstation requirements when working remotely and the staff at myelearnsafety.com can provide expert competent assessment of remote working conditions and provide the relevant advice.

For further advice contact cormac@elearn.ie or on +353 1 278 1938.

 

Article written by Vincent Traynor 

 

 

Why is Microlearning the Future for Health & Safety Training?

An accident at work is defined by the Health and Safety Authority (HSA) as ‘An unplanned event resulting in death, or resulting in an injury such as a severe sprain or strain (for example, manual handling injuries), a laceration, a broken bone, concussion or unconsciousness. ‘An employer’s duties under the Safety, Health and Welfare at Work Act 2005 includes the requirement for the provision of training. 

Most businesses do have a provision for safety training in place and most employers have (especially given the  current necessity) embraced online learning. This is a current trend. But what’s the trend for the future? 

Long, clunky, eLearning pieces (I’m sure you’ve seen these too!)  can be boring and laborious to employees. This is where microlearning comes into play.

 

What is Microlearning?

 

Micro-learning is a modern approach to delivering learning materials in small, bite-sized portions that target specific topics. The conciseness of these materials makes it easier to digest.

 

• Microlearning is performed in short time bursts.
• It requires little effort from individual sessions.
• It involves simple and/or narrow topics.

Millennials will make up a large part of the future workforce. Traditional models of eLearning just won’t cut it with this demographic, and will naturally be phased out. The popularity of microlearning is on the up as it’s the  ideal way to ensure that learning is received, digested and engaged with.

 

How to use Microlearning Effectively

The following are some examples of how microlearning can be applied in practice: 

 

Short and brief tips: When so much information is thrown at workers, the possibility of retaining all of it is very low. For effective transfer of knowledge, the microlearning objective should focus on just one concept.

 

Use interactive videos: The process of taking in information is better easier with the use of videos rather than bulky materials that cover an excessive amount. Even better if the video contains branching scenarios . 

 

Use of short quizzes for checking progress: The employees are provided with continuous access to these materials, and as each section is completed, they are required to provide suitable responses to the questions.

 

Use of gamification: Short games, or some gaming elements within the microlearning can be used by companies to increase interactivity, add an element of competition, the end goal being to help train their staff in health and safety more effectively. 

 

Shorter, asynchronous,  interactive courses with the above elements can benefit all health and  courses,  from Food Safety (HACCP), COVID-19 Compliance Officer, First Aid, Infection Prevention and control, to name but a few.

 

If you are looking for an effective way to streamline your safety training needs, Myelearnsafety.com offers a suite of health and safety courses to cover you. We offer a free trial to those who are interested, so you can see the benefits for yourself. 

 

For a free trial contact cormac@elearn.ie or call direct on 01 278 1938.