safety at work Archives

Pressure and Gas at Work

Pressure and gas at work from a mains supply can be very dangerous. Gas from mains is an explosive hazard if not used correctly. In addition, poorly maintained systems can cause death from carbon monoxide poisoning. It is important to make sure anyone employed to work on gas appliances is a Registered Gas Installer (RGI). According to Gas Networks Ireland:

“A Registered Gas Installer is an installer or service engineer who has completed the required gas installation safety training, who has the necessary insurance to carry out gas installations to the legal standard and who is registered with the Register of Gas Installers of Ireland.”

You should never use an unregistered gas installer to carry out work on your gas appliances, such as gas boilers, no matter how seemingly convenient or tempting it may be. Not even if this unregistered engineer is Daniel O’Donnell.

Even if it’s Daniel – Registered Gas Installers 30 second TVC. Run time 30s.

Pressure Systems

A pressure vessel is a container that holds a liquid or gas under pressure. A pressure system is one or more such vessels including associated pipework. Examples of pressure systems include compressed air systems, boilers, steam heating systems and autoclaves. If a pressure system fails during operation it can kill or injure people in the area. In addition, a significant damage to the property can happen due to impact from the blast, debris from the explosion and fire from escaping flammable gases or liquids.

Gas Cylinders

Gas cylinders can cause the same injuries as pressure vessels should the cylinder fail or be damaged. In addition, they can cause manual handling injuries from lifting and carrying heavy cylinders and crush injuries should cylinders fail.

Basic handling precautions include:

Securing cylinders upright so they do not fall.
Keeping cylinders away from fire.
Making sure cylinders are not dropped or banged.
Moving larger cylinders with a special hand truck rather than dragging or rolling them.
Always checking the identity of the gas before using it.

The Health and Safety Authority of Ireland (HSA) has a useful information page about gas titled Liquefied Petroleum Gas (LPG) Storage.

General Pressure and Gas at Work Controls

General controls when pressure and gas at work are in question include:

Regular maintenance and correct repair from a competent person.
Safe systems of work.
Training and supervision.

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Dangers of Vibration at Work

Use of plant and equipment that produces vibration is often not considered as a serious risk and dangers of vibration at work are often overlooked.

Vibration is the transmission of force from work processes into the worker. The Health and Safety Authority of Ireland (HSA) defines vibrations as ‘rapid movement to and fro or oscillating movement‘.

Examples of Vibration at Work

People in the course of their work life may be exposed to many sources of vibration. Dangers of vibration at work are more often overlooked than not. Some vibration affects the whole body (WBV), e.g. when driving a dumper truck over rough and even ground. Here the vibration, in the form of large shocks or jolts, is transmitted to the whole body via their feet or the seat. This could cause injury to the lower back and spine.

The most common problem is Hand Arm Vibration (HAV). HAV is caused by exposure to vibration, e.g. from using hand power tools. This can be very disabling, causing severe pain in hands and arms and lack of hand movement and feeling in the fingers. It is preventable but permanent once the damage is done.

Dangers of Vibration at Work – HAV Symptoms

The most common HAV symptoms to look for are:

Tingling in the fingers.
Loss of feeling and sensation in the fingers.
Reduced strength in the hand.
Fingers that go white in the cold and then red and painful on recovery.

Dangers of Vibration at Work – HAV Controls

Dangers of vibration at work, i.e. risk from vibrating tools or machines can be minimised by:

Introducing methods that eliminate, substitute or reduce the exposure to vibration.
Avoiding prolonged or frequent use of vibrating equipment.
Keeping cutting tools sharp so they remain efficient.
Making sure equipment is well maintained.
Avoiding forcing or gripping the tool more than is necessary.
Wearing gloves to protect the hands.
Exercising and massaging the fingers during breaks to restore circulation.

Health surveillance is crucial to spot and respond to early signs of damage.

Dangers of Vibration at Work – Further Reading

Chapter 2 of Part 5 and Schedule 6 to the Safety, Health and Welfare at Work (General Application) Regulations 2007 (S.I. No. 299 of 2007) as amended by the Safety, Health and Welfare at Work (General Application) (Amended) Regulations 2007 (S.I. No. 732 of 2007) sets down the minimum requirements for the protection of workers from the health risks associated with vibration in the workplace. This is a legislation that looks into dangers of vibration at work.

The Health and Safety Authority of Ireland (HSA) on their webpage Vibration at Work provide relevant to vibration at work information.

Online Health and Safety Training

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Working at Height

Working at height and falling from height is one of the biggest causes of death in the workplace and one of the main causes of major injury. Such injuries do not necessarily involve falls from very high scaffolding. They can be caused by any fall above or even below ground level such as an access ladder to an inspection chamber or sewer.

Working at Height Hazards

There are many hazards associated with working at height. The most common hazards include:

Using stepladders or unsuitable alternatives such as chairs or climbing on racking.
Working on scaffolding and other access equipment with inadequate fall arrest controls.
Falling through fragile roofs or skylights.
Objects such as tools falling from height and injuring those below.

Preventing Working at Height Accidents

Preventing working at height accidents is important on many levels. It can avoid costly legal costs but more importantly it can prevent human suffering and in the worst case scenario – human fatality. Preventing accidents is everyone’s duty, from employer to employee. Accidents most often occur:

People taking shortcuts and not using the correct equipment.
Equipment is not available or in poor repair.
Complacency, perhaps over-familiarity with the job.
Lack of awareness of the risks of working at height.
Inadequate training and supervision.

Managing and Selecting Equipment for Working at Height

There are a few simple – but important steps:

Carry out a risk assessment of tasks that are at height. Include in the risk assessment any fragile surfaces that might break if someone worked on it or fell onto it, e.g. fibre and asbestos cement roof sheets and skylights.
If at all possible, avoid working at height and consider if the task can be done in another way, for example using a sponge on an extendable pole to clean windows instead of climbing a ladder.
If working at height cannot be avoided, use equipment or other measures to prevent falls, e.g. guard rails, work platforms, podium steps, tower scaffolds, cherry pickers or scissor lifts.
When the risk of a fall cannot be eliminated, use equipment or other measures to minimise the distance and consequences of a fall, e.g. harnesses, netting and airbags.
Avoid working on, near, or passing across, fragile surfaces, e.g. repair skylights form underneath or provide fixed walkways with guard rails.

Additional measures to reduce the risk of a fall when using equipment for working at height include making sure:

The people have been trained to use it safely.
It is well maintained and regularly inspected.
There is adequate supervision to ensure people are working safely.

Working at Height – Ladders

Ladders are working at height equipment. Ladders may be suitable for light tasks of short duration, but suitable alternatives should be first considered. If ladders have been selected there are a few basic points to remember:

Always check ladders for damage before use.
Set them at the correct angle. The angle should be about 75° or the 1 in 4 rule, i.e., 1 unit out for every 4 units up. If they are at too steep an angle, the ladder could topple backwards and if too shallow an angle, it might slide down the wall.
The ladders must be secure. The ladders should be on firm, level, non-slippery ground. Ladders should not be leaned against plastic guttering. Ladders should always lean against a firm and resistant resting point.
Always grip the ladder and face the rungs when climbing. Try to avoid holding items when climbing but if you do need to carry something, have one free to grip the ladder.
Do not overreach. Keep your belt buckle within the stiles.
Keep both feet on the same rung throughout the task and don’t use the top 3 rungs of the ladder as this prevents a handhold.

Available Resources

The Health and Safety Authority of Ireland (HSA) has published a number of useful resources in relation to Working at Height. Some of these are:

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Workplace Transport and Vehicles

Almost all businesses use some form of workplace transport and vehicles. There are many examples. A busy factory site with lorries being loaded for despatch. Forklift trucks whizzing around the site. Staff arriving for work in cars. Visitors and staff walking around the site and delivery vehicles reversing into dock loading bays.

Without controls aimed at workplace transport and vehicles, there is a high likelihood of an accident occurring. Unfortunately, almost every year a number of people are killed in vehicle accidents at the workplace.

Risk Assessment – Workplace Transport and Vehicles

A risk assessment must be carried out to identify the hazards and implement controls to minimise the risk. Such controls may include:

Clearly marking segregated traffic routes separating pedestrians from vehicles. This would be ideally done with physical barriers.
Making sure route ways are sufficiently wide for the vehicle, for example aisles between warehouse racking should be wide enough for a forklift truck to move easily and manoeuvre with loads.
Avoidance of obstructions in traffic routes by enforcing good housekeeping.
Sufficient lighting, both externally and internally, to enable drivers to identify obstructions, other vehicles and pedestrians.
Keeping traffic routes in good repair so uneven surfaces, holes, etc. do not cause vehicle damage or accidents.
Speed limits that are displayed and enforced as well as signage to alert drivers to other hazards such as low headroom, or overhead cables.
Designing traffic routes to avoid blind bends and where visibility is restricted, mirrors or implementing one-way systems should be considered.

Common Causes of Accidents

When we talk about workplace transport and vehicles, one of the most common vehicles used in the workplace is a forklift truck. They account for many of all workplace transport accidents.

Common causes of accidents are:

Driving too fast.
Unbalanced loads.
Horseplay.
Reversing.

Reversing of workplace transport and vehicles is a frequent cause of accidents. Consideration should be given to ensure adequate space for reversing vehicles and restricting access to the reversing area. This area should be clearly marked and signed.

Visiting drivers should be made aware of the site layout and transport routes. It may be necessary to provide instructions in other languages for foreign drivers and allow for the fact they may have different visibility from left hand drive vehicles.

Maintaining Safe Workplace and Transport Vehicles

There are many different types of workplace and transport vehicles that can be used. A proper selection will depend on the task to be performed. It is very important that the correct vehicle is selected for the appropriate task and that the vehicle is safe to use. As well as regular routine maintenance, there are some basic pre-use checks drivers should make. These include:

Horn.
Lights.
Brakes.
Tyres.
Oil Spillages.
Seat and Seat Belt.
Any Obvious Signs of Vehicle Damage.

Whichever vehicle is being driven, the driver must be trained and competent. Safe system of work should be in place to make sure unauthorised staff cannot operate vehicles and there are sufficient work breaks to stop drivers becoming overtired.

Safety Management Resources for workplace and Transport Vehicles

The Health and Safety Authority of Ireland provides a comprehensive key transport safety management resources available on their website page titled Vehicles at Work. The resources are a convenient and easy to use information portal. In addition, the HSA has published a convenient Information Sheet that provides basic guidance on the management of vehicles and mobile work equipment in the workplace.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

True Cost of Poor Workplace Safety

True cost of poor workplace safety can be significant and very harmful to everyone interacting with the business with poorly managed Health and Safety. It can be a reason for significant business costs. More importantly, it can have distressing human costs.

Implementing and managing Health and Safety procedures in the workplace is not an optional addon to regular business activity. It is a legal requirement. It is also a moral and ethical obligation. Excuses, such as ‘health and safety is not necessary in our case’, ‘it’s just bureaucracy and unnecessary paperwork’ and ‘we don’t need it – we know what we are doing’ are not acceptable. All workplaces should strive to achieve a workplace which is a safe workplace as much as it is feasible. All work related injuries should be brought as close to zero as possible.

It is sometimes that employees themselves approach Health and Safety procedures lightly. Even if warned about dangers, they might abandon correct Health and Safety procedures to ‘speed up’ or avoid doing ‘extra work’. This is often guided by the misconception that they will be able ‘to see’ if anything dangerous starts developing and adjust themselves to avoid disaster’ – which is almost never true. In fact, danger started to develop the moment Health and Safety policies were ignored.

The Ultimate Price of Poor Workplace Safety

There is no such a thing as ‘light’ work-related injury. All injuries can take a heavy toll to everyone involved. Unfortunately, some injuries could be fatal. Sadly, this is the ultimate true cost of poor workplace safety.

In 2022 there were 26 workplace related fatalities in Ireland. 26 people left their home, their families never to return home. You can read more about Workplace Fatalities from 2017 to 2022 in our blog entry from 30th June 2023 Health and Safety in the Workplace.

Workplace accidents and their prevention are key priorities of anyone at work. This is not only true for employers but employees as well. You can read more about Workplace Accidents and Their Prevention in our blog entry Health and Safety in the Workplace from 21st April 2023.

From the PRESS

The following contains few of countless examples that demonstrate true cost of poor workplace safety:

Man, 20s, dies in Carlow road tragedy after reportedly falling from truck

A man in his 20s has died following a road traffic accident in Carlow when he reportedly fell from a truck.

The tragic incident took place in the College Green area of Carlow town on 16th August 2023 at 1:30pm on Wednesday afternoon.

Gardaí are investigating the circumstances of the man’s death to determine the exact cause.

A spokesperson for An Garda Síochána told The Irish Mirror: “It’s reported that a male in his 20s received fatal injuries after falling from a truck during the course of his work.

Taken from The Independent.

Male worker, 26, dies after suffering ‘severe head injuries’ in ‘heavy machinery incident’ at construction site of Everton’s new stadium – the football club says everyone is ‘heartbroken’ by the death as investigation is launched (UK)

A 26-year-old construction worker has died after suffering ‘severe head injuries’ in an incident at site of Everton’s new stadium.

First responders were called to the site at Bramley Moore Dock around 12.32pm on 14th August 2023 following a ‘major incident’ that allegedly involved heavy machinery.

The worker was rushed to hospital but despite medics’ best efforts, he died.

Construction company Laing O’Rourke confirmed to MailOnline the man was carrying out work at the time of his death as Everton FC described the news as ‘heartbreaking’.

Investigators with Merseyside Police and the Health and Safety Executive (HSE) remain at the scene as they ‘continue with the early stages of the investigation’.

Workers from the site at Bramley Moore Dock said they were informed of the incident and then asked to leave the area, but couldn’t share more details, The Liverpool Echo reported.

Local reports indicate the incident involved heavy machinery and the 26-year-old suffered head injuries.

Taken from The Guardian.

Farm Safety Week 2020 – Elizabeth’s story

Elizabeth Ormiston, a beef farmer from Co. Cavan suffered a farm accident in 2009 that resulted in her being placed in an induced coma. This is her story.

Farm Safety Week 2020 – Elizabeth’s story (YouTube Link). Run time 2m 19s.

Managing Health and Safety in the Workplace

The role of the Health and Safety Authority of Ireland (HSA) has an important role as they ensure that over 2 million workers (employed and self-employed) and those affected by work activity are protected from work related injury and ill-health. The Health and Safety Authority strategic priorities are to:

Regulate: Increase focus on compliance through risk based inspection and enforcement.
Promote: Support, educate and raise awareness to prevent accidents, injuries and ill health.
Accredit: Grow the national accreditation service to enable and support enterprises and public services.
Influence: Partner and collaborate in support of healthy, safe and productive lives and enterprises.

All workplaces, from one-person farms to multinationals with thousands of employees must implement Health and Safety procedures guided by legislation and best work practices.

The HSA exists to assist and support achieving a safe workplace. This support is available to employers and employees equally.

Don’t Become a Statistic!

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Noise at Work

Often wrongly disregarded as trivial, noise at work could have a severe impact on human health. Any unwanted sound around us, or loud discordant or disagreeable sound or sounds can be referred to as noise. While low levels of noise in the workplace are unlikely to cause harm, louder levels of noise can result in permanent hearing damage or loss.

Legislation in Relation to Noise at Work

The General Application Regulations 2007, Chapter 1 of Part 5: Control Of Noise at Work is available legislation to protect workers from noise exposure. This legislation sets down the minimum requirements for the protection of workers from the health risks associated with noise in the workplace.

In addition, the Health and Safety Authority of Ireland has published Noise related FAQ on their website. This is a sound source of information for most Noise related questions.

Signs of Excessive Noise at Work

The effects of very loud noises are often instantly apparent, but damage caused through exposure to lower levels of sound over a longer period of time may initially go unnoticed.

Generally speaking, a person is exposed to excessive levels of noise when:

They have to shout to be clearly heard by someone 2 meters away.
Their ears are still ringing after leaving the workplace.
The noise is intrusive (e.g. a vacuum cleaner) for most of the day.
They work in a noisy industry (e.g. construction).
There are noises due to impacts such as caused by hammering.

Symptoms of Hearing Damage

Noise is measured in decibels (dB). Environments of 80 dB or more require employers to carry out a noise risk assessment and control methods should be introduced, such as providing information, training and hearing protection. If noise levels are above 85 dB, hearing protection zones should be established and PPE provided to anyone needing to enter a hearing protection zone.

Some of the symptoms of hearing damage are:

Temporary hearing loss after exposure to loud noise.
Ringing or noises in the ears (tinnitus).
Difficulty is distinguishing similar sounding words.
Muffled sounds.
Background noises making conversation confusing.
Having to ask people to speak louder or increase the volume on TVs and radios.

Selecting PPE for protecting against Noise at Work

When selecting PPE, it is important to make sure that the equipment is:

selected carefully with sufficient rating for the noise hazard,
fitted correctly,
compatible with other PPE used by the workforce,
properly maintained,
worn whenever it is appropriate.

In noise control areas, fire alarms must be supplemented with flashing lights or beacons. In the interest of safety, the wearing of hearing defenders outside the restricted area should be discouraged to make sure employees are aware of sounds around them.

Levels of Noise at Work Control

The Noise at Work control levels are:

1. Identify the hazard and assess the risk. This requires a specialist assessment using a noise meter.

2. Reduce the noise by:

designing systems with low levels of noise,
choosing machines with lower levels of noise,
enclosing equipment in sound proofing material,
lagging noisy ducting and pipes,
adding acoustic dampening panels on walls and ceilings,
having equipment properly and regularly maintained.

3. Reduce exposure to personnel (can the regular job be performed further away from the noise source).

4. Reduce the time the employee is exposed to noise.

5. Mark areas where there is a noise hazard as designated areas of protection.

6. As a last resort, if noise is unavoidable, provide Personal Protective Equipment (PPE) and organise proper training in its use.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Health and Safety in the Workplace

Effective Health and Safety management in the workplace is an important element of every organisation. Every year, accidents at work cost the Irish industry billions of euros. The effects of the injuries sustained vary from minor to major injuries. In some cases, employees will be needing an extended period of time off work. In other cases they will never be able to work again. Unfortunately, in some cases they will receive injuries that would be fatal. The fact is, many of these accidents are avoidable and should have not happened.

Much of Health and Safety relies on ensuring that the appropriate risk precautions are in place. Additional information about workplace hazards are available in our blog entry from 21 April 2023 Workplace Accidents and Their Prevention. If individuals are aware of potential hazards and adopt safe working practices, they can control the risks and reduce the number of accidents and injuries.

Workplace Fatalities from 2017 to 2022

The work-related injuries include any injuries incurred by workers in the course of their work. These injuries can range from minor injuries to the most serious injuries that resulted in death. According to the Health and Safety Authority of Ireland and the Health and Safety Statistics they publish, the following is workplace fatalities statistics for years 2017 – 2022:

2017 – 47 fatalities.
2018 – 39 fatalities.
2019 – 48 fatalities.
2020 – 54 fatalities.
2021 – 38 fatalities.
2022 – 26 fatalities.

There have been 230 fatalities in Ireland since 2017.

Health and Safety in the workplace is an important aspect of any organisation. All work related fatalities are preventable through vigilance and effective Health and Safety management. All employees and persons affected by business activities deserve to go home after their work day has ended.

Common Causes of Accidents in the Workplace

Whilst not all workplace accidents result in death, the majority of them will result in an injury. Common causes of accident in the workplace are often:

Slips, trips and falls.
Poor lifting and carrying.
Being struck by vehicles or moving objects.
Falls from height.
Misuse of machinery.
Incorrect use of harmful substances.

Work related activities can also be responsible for diseases and ill health. These, in some cases, can have long term, irreversible effects. For example:

Hearing loss from noisy workplaces.
Stress
Skin disorders.
Hand Arm Vibration Syndrome (HAVS).
Back pain.
Asbestosis and cancer as a result of asbestos exposure.
Work-related lung diseases and cancers.

These hazards can be controlled by assessing risks and putting in effective controls. Effective health and Safety practices will not only minimise the pain and personal consequences to individual employees, but also reduce the financial impact on employers and services funded by the taxpayer.

Business and Human Costs of Ineffective Health and Safety in the Workplace

The costs on the business for ineffective Health and Safety in the Workplace can be significant:

Legal advice and insurance costs.
Legal action, possibly resulting in compensation.
Sick pay.
Lost production and sales.
Equipment and stock losses and damage.
Time and money spent on investigations and improvements.
Recruitment and payment of cover/replacement staff.

These, however, can fade into insignificance when weighed against the human cost:

Pain and suffering.
Disability, possibly long-term.
Health care and rehabilitation.
Loss of earnings.
emotional and financial burden on family.
Potential loss of life.

Safe working conditions are a prerequisite for a healthy and productive workforce.

Ineffective Health and Safety in the Workplace – From the Press

The Health and Safety Authority reported on 26th June 2023 that the company was fined €750,000 after fatal fall from height in workplace. The fatal incident occurred when a worker stepped onto a fragile surface. The fragile surface that sealed a vertical service duct which gave way and the worker fell from a height.

Mark Cullen, Assistant Chief Executive of the Health and Safety Authority, commented, “Where there is a known risk in a workplace, in this case working from height, employers in control of that workplace have a duty to ensure that the appropriate precautions are in place. This will protect employees and others who may be carrying out work activity at the place of work under their control. Failure by the employer in this case has led to the tragic death of a worker. We urge employers to carry out risk assessments and engage with their employees and others to ensure that incidents like this one are prevented.”

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Ergonomics in the Workplace

Ergonomics in the workplace is one of the most overlooked workplace related hazards. Ergonomics is the science of fitting the task to the person by designing equipment and apparatus that fits well with the human body and the way that it moves. People come in all shapes and sizes. This is why all workstations should be designed with adjustable features. For example, adjustable seats and work platforms. This will enable the worker to work comfortably. Uncomfortable workstation can result in people stooping, stretching, overreaching, twisting, etc. This can cause muscle fatigue and strain. In addition, it can possibly cause longer term damage or deformation.

Risk Assessing the Ergonomics in the Workplace

Some of the factors that should be considered when risk assessing the ergonomics of work activities are:

The degree of force that is needed to do the job.
The environmental conditions – lighting and temperature.
Adequacy of rest periods.
The repetitiveness of the task.

Any machine expected to carry out repetitive motions must be regularly maintained and parts replaced as they wear out. Failure to maintain machinery may result in breakdown. People may also be expected to carry out similar repetitive tasks and suffer wear and tear as a result. This can cause them to suffer permanent damage and being unable to work. Any activity involving high repetitions should be looked at carefully and redesigned to avoid this as far as possible.

Enabling Ergonomics in the Workplace

Some of the effective measures to enable good ergonomic practices in the workplace are:

Alternating tasks and work breaks to avoid repetitive strain injuries.
Providing comfortable working temperatures and adequate ventilation.
Providing sufficient lighting and minimising glare by glazing windows or supplying blinds.
Minimising vibration.
Mechanising the task.
Regular health tests may be necessary and should be promoted by employers.
Training will also help employees to be more aware of good practice.

Occupations commonly associated with musculoskeletal problems are computer users, checkout operators, dentists and workers on production lines. One of the preventive measures that should be taken to prevent injuries at work is Manual Handling training. The eLearn Safety provides blended learning Manual Handling course has been designed by our qualified tutors to assist the employer to comply with current legislation.

Ergonomics in the Workplace and Display Screen Equipment

Display screens cause many instances of eye and wrist strain, back problems and headaches. Some additional insights into problems caused by use of display screens can be found in our blog entry Prolonged Static Sitting at Work from 26 May 2023.

Many of the problems associated with the use of display screens can be mitigated by implementing effective measures to enable good ergonomic practices as listed in the previous paragraph.

Some additional measures should be provided/enabled:

Eye tests for regular users of display screen equipment.
Sufficient desk space to provide support for the forearms and at a height where they are parallel to the surface of the desk.
Height adjustable seating with back support and footrests available if necessary to facilitate correct posture and comfort.
Height adjustable display screens to enable them to be positioned so the eyes are level with the top of the screen. They should have filters (if older models to minimise flicker and glare), screen controls and be placed to avoid reflections on the screen.
Adequate work space under the desk to allow the operator to change positions.
Regular training in recognising the adverse effects that incorrect use can have on the body and how to correct incorrect postures. eLearn Safety offers a fully online VDU/DSE course.

Staff experiencing discomfort and pain whilst using display screen equipment should report these issues to their employer as soon as they become aware of them. To help understand the use of VDU/DSE, the Health and Safety Authority has published useful Display Screen Equipment – (DSE/VDU) – Frequently Asked Questions.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Asbestos in the Workplace

A number of Laws and Regulations have been made to ensure that workers are protected from risks related to exposure to Asbestos in the Workplace.

Asbestos is a name for a group of six naturally occurring mineral fibres. They are very strong and corrosive resistant material. However, it is now recognised that asbestos exposure can have serious health consequences.

Asbestos was extensively used as a building material in the Irish construction industry up until 1999. The majority if not all of the buildings built between 1940 to 1985 contain asbestos in some form. This is the time in which asbestos production peaked.

Asbestos has been widely used in construction for a variety of purposes. It was ideal for fireproofing and insulation, but its use was wider than this. Asbestos was used in:

Fireproofing
Thermal Insulation
Electrical Insulation
Sound Insulation
Decorative Planters
Roofing Products
Flooring Products
Heat Resistant Materials
Gaskets
Chemical resistance

Dangers of Asbestos

Exposure of workers and the occupier to asbestos in the workplace can occur during uncontrolled asbestos removal or disturbance. Asbestos is the greatest single work-related cause of death from ill health. Past exposure is now responsible for thousands of people dying from asbestos related cancers every year. This is expected to increase because it can take 15-60 years for the disease to develop and there is no cure.

According to the HSE Asbestos Fact Sheet, it is now recognised that the short-term high level inhalation exposure to asbestos has been associated with lung cancer, mesothelioma and pleural disorders. Further asbestos studies have shown that chronic inhalation is similarly detrimental to human health. The chronic exposure to asbestos is associated with asbestosis, pleural abnormalities, mesothelioma and lung cancer.

When materials containing asbestos are distributed, damaged or allowed to deteriorate, asbestos fibers can be released into the air. Asbestos fibers are potentially fatal if they are breathed in. Asbestos can also enter the human body through ingestion, though this is less common. The fibers can enter the lungs and damage them causing scars that stop the lungs working properly or even causing cancer. According to the World Health organisation, asbestos is a proven carcinogen for which a safe air concentration cannot be established.

Anyone who disturbs asbestos containing materials, e.g., by working on them or near them, can be exposed to asbestos fibers. Those most at risk are those who carry out building maintenance and refurbishment work, e.g. electricians, joiners and heating engineers.

The Law and Asbestos in the Workplace

Duty holders need to manage the risk from asbestos in the workplace and make sure an assessment is made as to whether asbestos is, or may be present in the building. This includes where the asbestos is, or is assumed to be and what condition it is in. It should always be assumed that asbestos could be present until a full survey is done.

As with any work activity the requirements of the Safety, Health and Welfare at Work Act, 2005 (S.I. No. 10 of 2005) and the Safety, Health and Welfare at Work (General Application) Regulations, 2007 as amended (S.I. No. 299 of 2007 & S.I. No. 732 of 2007) apply and must be considered with respect to the protection of workers at the place of work. In addition, as regards specific work activities involving working with materials containing asbestos, particular attention must be taken concerning the requirements and control measures as outlined in the relevant asbestos related legislation. Such additional regulations are the Carcinogens Regulations, the Construction Regulations and Other Regulations (such as Confined Space, Work at Heights, etc).

Asbestos Awareness

According to the HSE Asbestos Public Health Advice, asbestos is present all around us. Traces can be found in small quantities in urban and rural air samples. We are all breathing in small amounts of asbestos fibers over our lifetimes.

Whilst we cannot always risk assess the environment around us, employers are required by law to identify all hazards in the workplace. This includes asbestos in the workplace. You can read more about workplace hazards in our Workplace Hazards blog from 24 February 2023. The Safety, Health and Welfare at Work Act, 2005 (No. 10 of 2005) imposes specific duties on employers to provide adequate information, instruction, training and supervision to their employees to ensure their safety, health and welfare at work.

The eLearn Safety online school offers a fully online Asbestos Awareness course. The aim of this course is to provide information on the identification and the prevention of occupational illness from exposure to respirable asbestos fibres.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie