Risk Assessment Archives

Online Health and Safety Training and its Benefits

Online Health and Safety training offers a strong return on investment for employers and a quick way to get employees up to date with workplace safety. Online courses are also tailored to specific areas of workplace safety. They can ensure employees are getting the exact information they need to do their job safely. In this article, we take a closer look at the benefits of online training for workplace safety.

The Importance of Online Training for Workplace Safety

Studies show online education is growing by 5-10% each year as more and more employers move their training methods online. According to the Irish Central Statistics Office (CSO) there was a sharp increase in the use of education portals/websites during COVID-19 with over one fifth (21%) Communicating with instructors or students using educational websites/portals, an increase of seven percentage points in 2019. These numbers remain high even after the COVID-19 pandemic. With the rise of digital technology in all areas of our lives this trend is far from declining.

Online Health and Safety training is a convenient way for staff to learn about their safety in the workplace. It removes many constraints which often hinder classroom training. This type of training is also very specific. It usually focuses on the precise lessons needed to stay safe in the workplace. From food handling and fire safety to workplace stress and working at heights, such online courses are always relevant to the workplace and ensure employers are abiding by certain laws and regulations.

Let’s take a look at some of the main benefits of online training.

7 Key Benefits of Online Training for Workplace Safety

1. Online Training Draws from High Quality Resources

Online training usually draws inspiration from the best interactive experiences online and incorporate these learnings into an online course. As a result, online training can sometimes include video conferencing or webinars and other opportunities which enable staff to engage remotely. Simply put, this consistent high quality and extent of resources is rarely guaranteed in the classroom.

2. Learning Practical Skills for Real World Experience

Employees develop soft skills through online training and practical lessons which they can put into practice at work. These lessons often come from real experience which can feel more relevant than the theory which you might hear about in a classroom. Online courses also use simulations, scenarios and multiple choice questions to ensure these lessons are always relevant to real world scenarios. This also highlights the objective of online training – to give employee the exact education they need to know to do their job safely.

3. Employees Often Retain More through Online Training

Research shows how many employees are likely to forget what they learn in the classroom. It makes sense when you think back to school days and just how little algebra or poetry you might remember! Memory retention is boosted by relevant experiences which can be applied straight away. With this in mind, online training is often split into areas of knowledge and structured to increase relevancy. This increased relevancy means employees will more likely learn and recall the contents of an online course than they might in a classroom.

4. Online Courses Can Be Scheduled for Any Time/Place

Standard classroom training is always set at a specific time but co-ordinating this time is near impossible in such a fast-moving world. There is also a time loss for going to and from a classroom. Many employees are likely to feel restricted in a classroom environment. Online training can take place at any time and enables employees to undergo the training at their own pace. It’s a win-win situation for both employers and employees. In addition, it also removes the requirement for having a classroom to facilitate the training.

5. Immediate Access to Support and Resources

Online training provides immediate access to a large number of resources which allows them to find answers at the time of learning. Classroom training takes place in a specific location where employees are most often unable to access training resources in real time. This means employees don’t need to wait until the next class to ask questions and can address any immediate challenges or concerns before moving on with the training. Online training can use forums or social media groups to provide extra support and provide employees with a place whether they can share tips or ask questions.

6. Online Training is Designed for Different Learning Preferences

Every audience consists of different people with varying abilities and backgrounds. However, more recent generations have become accustomed to smart technology and the online world. These employees are also likely to have acquired skills through Google, YouTube and apps in the past and appreciate this method of learning. This is why the rate of attention and engagement with online training is often said to be higher than a classroom. Online training is designed to cater to all learning preferences.

7. High Levels of Engagement and Responsibility

Some online training courses are gamified which means they feature levels, rewards and certain mechanics which encourage progress. These courses seek to encourage the learner to progress and keep going until they complete each lesson. They can also monitor performance along the way and feel more invested or responsible for participating in the course. It is this high engagement which should be attractive to employers and the fact they can outsource this time consuming process to a trusted online training platform.

Working with a training company

Working with an online training platform can help employers lighten the load and allow the experts to take care of the training. However, it’s important to choose a platform which abides by laws and regulations and incorporates these requirements into the online training. For instance, MyElearnSafety offer courses online health and safety training for Food Safety which adhere to the principles of the internationally recognised Hazard Analysis and Critical Control Points (HACCP). It also offers Fire Safety Awareness, Manual Handling Awareness, Paediatric First Aid just to name a few.

Check out MyElearnSafety today and we can get everyone up to speed on their workplace safety!

eLearn Online Health and Safety Training

Workplace Risk Assessment

Workplace risk assessment is fundamental step of any workplace Safety Management System (SMS). A risk assessment is a process used to identify potential hazards and analyze what could happen if a disaster or hazard occurs.

Understanding Risk Assessment

In order to understand ‘risk’ and ultimately ‘risk assessment’ we must perhaps firstly comprehend what constitutes risk and what risk is. Why we, as humans take risks almost every day of our waking lives. We take risks at home, in the office, and certainly on our way to work in the mornings as we undergo the ‘commute’ and face the challenges inherent within.

Haimes (2009), discusses risk as an amalgamation of risk dimensions, but with a more ‘human’ understanding of a problem or ‘risk interpretation’. For example, the crusty ‘old timer’, has a subjective understanding of a system that only ‘he’ understands. To use an example of a ships’ engine, the ‘old boy’ can ‘hear’ the problem. They can almost ‘feel’ the problem, sensing the risk in its continued use as opposed to the new trainee. The new trainee approaches the problem from a ‘text book’ stance. Both individuals are aware of ‘risk’ but each approach the issue from completely different angles.

Risk as an Uncertainty Management

Power (2004), labels risk as ‘uncertainty management’. He goes on to discuss how we try to create ‘constructs’ in which we can work and live. For example, seatbelts, signage, ISO standards etc. Power (2004, p.9) states that “we cannot know the risks we face now or in the future but we must act as if we do”. This is perhaps the whole ‘crux’ of risk management and risk assessment. We ‘plan’ for an outcome, we anticipate it to a certain extent but we can never fully know what its full effect will be.

As previously mentioned, we wear seat-belts, and bikers wear helmets. Unfortunately, that that does not remove the risk of excessive speed or other motorists. We can experience a car crash, we can survive. We exit our vehicles in a state of shock but then we wander onto the motorway and are stuck by a passing vehicle whose driver’s attention has been taken up with their voyeuristic intent to see the carnage of our current situation. That momentary ‘lapse’ in their concentration dooms us. Although we have ‘planned’ for a certain risk, (a car crash), we have not planned for our own immobility or shock, nor the ignorance of outside observers.

Available Solutions

So, what can we do? How do we plan for risk and conduct adequate risk assessment. Can we remove or reduce the factors which precipitate disaster, and stop ourselves and others from for getting hurt? Hollnagel, (2008, p. 172) discuses resilience and how it requires the capacity for anticipation of risk and a management plan to be applied as risks arises. To this end, perhaps the ‘Robson Risk Management Model’ may be adequate and appropriate in this regard.

This model can be used in both a ‘personal’ concept and applied in an organisational context.

Perception of the Risk

The individual or organisation perceives that a risk may be inherent in a certain activity or action.

Risk Identification.

The risk(s) of the activity is ‘identified’ and ‘labelled’ (in the organisational context) with a ‘risk assessment’ form.

Assessing Risk

The risk is ‘assessed’ on the basis of its ‘potentiality’ and ‘gravity’. If we are competent and thoughtful driver, the likelihood that we will experience a car crash might be low, but still exist. The severity however, if we crash, might be catastrophic.

Risk Strategies

Stemming from the risk assessment above, numerous risk strategies are developed with a view to removing the risk even further. This can take the form of ‘avoidance’, transfer, retention or reduction. This is referred to as the ‘HOC’ or hierarchy of controls, and is applied as follows:

Eliminate hazard at source

Elimination of a hazardous material or method. This is a permanent solution which eliminates the offending item completely, however this may not always be a viable scenario. Some hazardous items must be used or worked with in their current state, such as ‘live’ munitions on a range.

Substitute hazard at source.

If it is possible to substitute an item. An example of which is when a military force might use ‘blank rounds’ for exercises and instruction of new entrants. This substitution completely removes the risk of ‘friendly fire’ occurring.

Isolate or enclose the hazard.

An example of this is range practices being conducted ‘only’ on certified and controlled ranges. An adequate security and signalling is there in place to prevent entry to non-firers and to inform others that a shoot is taking place. This allows for the hazard to be successfully isolated and controlled without the possibility of injury.

Engineering controls

Examples of this are the aforementioned security at ranges, flag system of notification and cordon enclosing the range.

Administrative controls

Adequate supply of qualified and experienced range managers ‘in situ’ to manage the firing, observe and enforce safety measures/controls and relieve one another for breaks throughout the day. This allows for fresh, focused and diligent staff to manage the activity.

Personal protective equipment (PPE)

The last measure is the use of the correct PPE. On range practices, shooters, range security, ‘butt party’ members (those controlling the targets) and range staff must all wear adequate PPE. PPE is in the form of a Kevlar helmet, double hearing protection and GSBA (general service body armour). This control enables an extra layer of protection in the unlikely event of a miss fire.

Risk Evaluation

Following all of the above measures, the risk is then re-evaluated in order to ascertain if it still poses the same levels of risk or if the necessary controls are adequate and appropriate to remove or reduce the threat as far as possible. However, it must always be borne in mind that the full elimination of risk is perhaps impossible as it encapsulates far too many variables (both known and unknown), such as human factors, equipment, environment and indeed the risk area itself, thus in order to live with risk we should perhaps understand that a measure of risk is ever present and ‘natural’ and may even be ‘necessary’ for our continued advancement as a species.

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

eLearn Online Health and Safety Training

Ergonomics in the Workplace

Ergonomics is the study of working interactions between humans and machines/workstations and the factors that affect those interactions. Stemming from the Greek words ‘ergo’ & ‘nomus’ (workflow) it is in simple terms ‘fitting’ the job to the person as opposed to fitting the person to the job.

Origins of the Ergonomics

Ergonomic practitioners draw upon a number of different disciplines. Some of these are ‘biomechanics’ (the study of human movement and the associated laws) and ‘anthropometry’ (the study of human measurements). These disciplines assist ergonomic practitioners in identifying ergonomic risk factors.

Importance of Ergonomics in the Workplace

Failure to apply the principles of ergonomics within the workplace i.e., a busy office environment or warehouse can result in chronic or acute musculoskeletal injuries. If left unchecked can result in functional limitations. Employees working in such environments are also susceptible to RSI ‘repetitive strain injuries’ and WRULD ‘work related upper limb disorders’.

When designing workstations ergonomic considerations are of significant importance. An ergonomic risk assessment can help to identify issues with existing workstations. However prior to conducting a risk assessment a task analysis should be conducted. A task analysis is conducted in order to get an appreciation of an employee’s daily routine. A task analysis will highlight current or potential issues for the employee, time spent at the work station, breaks, and shift work. All these should all be taken into consideration. In addition, biomechanics and anthropometrics will also play a part at this point.

Ergonomic Tools

Ergonomic practitioners can utilize a number of tools in order to assist them in rating the risks accordingly:

Rapid employee body assessment (REBA) tool.
Rapid upper limb assessment (RULA) tool.
Assessment of repetitive tasks (ART) tool.

In addition, eLearn Safety offers a full online VDU/DSE course. This course is fully online and can be taken 24/7. On completion of this VDU training course, participants will be provided with the information necessary to ensure current legislation is complied, risk assessments are carried out and all employees are competent to adjust their work stations to provide a safe place to work in.

Furthermore, a task analysis will help to identify if an employer is compliant with current legislation under the SHWW Act 2005. An office employees’ display screen is in essence a visual display unit. Therefore an employer must adhere to the guidance document within the general application regulations pertaining to VDU’s and display screen equipment.

Ergonomics in the Workplace Recommendations

Where office workers should be afforded the option to conduct his/her work both in the seated and standing position, employers must ensure chairs and VDU’s have the ability to be adjusted to suit all employees and consider frequent breaks and job rotation where practicable. Employers should also promote good working practices. For example, encouraging staff to make recommendations based on their working environments. If working in a warehouse or on a manufacturing line, workers should use appropriate equipment. A proper equipment will aid them in their jobs. Some of the examples are foot stools, foot rests, anti-glare eye protection, etc.

Employers should always be cognizant of the fact that ‘one shoe does not fit all’ when it comes to ergonomic assessments. For example a tall employee may feel cramped in a small area whereas a short employee may be uncomfortable if constantly reaching for items or if their feet are not supported when sitting.

Thus, structuring the working environment in order to suit the user is a step away from Taylors’ method of ‘scientific management’. Such a method, regardless of body shape and size or indeed the work being undertaken, was standardized across the board and the worker had to adapt him/herself to the factory conditions or face the prospect of dismissal and future injuries as a result.

Ergonomics Assessments

Ergonomic assessments are not difficult to undertake, and when carried out effectively can help to reduce the risk of ergonomic injuries and pain. In turn, this will help to motivate employees, allowing them to be more productive and happier in the working environment. Employers should always be aware of their responsibilities to their employees under the SHAWW Act and take the necessary steps to create risk free working environments where possible. Employees must also be aware of their rights and support any safety initiatives the employer wishes to implement, as the saying goes, ‘the rising tide floats every boat’.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Working in Confined Spaces

Working in confined spaces is a high risk working environment.

What does it mean Working in Confined Space

Any significantly enclosed space where there is a risk of death or serious injury from hazardous substances, lack of oxygen or other dangerous conditions is classed as a confined space. Confined spaces with small openings such as silos, drains, sewers and storage tanks are fairly obvious. Others are not. Ductwork, vats, open-topped chambers may be less obvious.

Before Working in Confined Space Commence

Before working in confined space commences, certain steps should be taken. All hazards present must be identified and the risks assessed. This information should then be used to determine what precautions are needed and safety procedures developed (including emergency rescue).

Confined Space Entry

If working in confined spaces can be avoided – it should be avoided.

According to the Health and Safety Authority of Ireland and the Safety, Health and Welfare at Work (Confined Spaces) Regulations 2001, Regulation 5 states that:

A person shall not carry out work in Confined Spaces if it is reasonably practicable that it could be avoided.

If the work must be carried out Hazard Identification and Risk Assessment must be carried out prior to the work commencing.

A person shall not enter a confined space unless there is a system of work in place that has been planned, organised, performed and maintained so as to render that work safe and without risk to health.

Anyone entering a confined space must be provided with appropriate information, training and instruction appropriate to the particular characteristics of the proposed work activities.

Questions to Ask

Before working in confined space commence, the following should be considered:

If someone is working in a confined space, think about the following:

If a worker gets overcome by fumes how will anyone know this is happening?
Once workers become overcome by fumes how can they be rescued?

Always:

Make sure you are fully aware of all the risks associated with working in confined space!
Make sure that the person performing work in confined space is competent (capable and trained) to work in confined spaces and in use of emergency equipment.

Never:

Work in confined spaces if it can be avoided.
Let unskilled people engage in confined space work.
Let anyone enter confined space unless sure it is safe to do so.
NEVER ignore risks associated with working in confined space.

Useful Resources

The Health and Safety Authority of Ireland (HSA) has a very useful info page titled Working in Confined Spaces. This page covers some of the most frequently asked questions about working in confined spaces.

In addition, the UK’s Health and Safety Executive info page titled Introduction to working in confined spaces can provide additional very useful information about working in confined spaces.

Tragic Example

As The Irish Times reported; on June 10th, 2015 brothers Alan (45) and Stephen Harris (32) were overcome by fumes while working in an underground sewer at Drumnigh Woods, Portmarnock, Co Dublin. They were taken from the sewer and taken to hospital but unfortunately died of hypoxia due to toxic levels of hydrogen sulphide.

The brothers were wearing wader boots and rain jackets and Stephen Harris was wearing a dust mask.

A toxic gas incident that claimed the lives of two brothers almost killed a fireman attempting to rescue them.

How It Could Have Been Avoided

Health and Safety Authority inspector Frank Kerins said the job required specialist equipment in accordance with confined space regulations, including a gas detector and breathing apparatus.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Dangers of Vibration at Work

Use of plant and equipment that produces vibration is often not considered as a serious risk and dangers of vibration at work are often overlooked.

Vibration is the transmission of force from work processes into the worker. The Health and Safety Authority of Ireland (HSA) defines vibrations as ‘rapid movement to and fro or oscillating movement‘.

Examples of Vibration at Work

People in the course of their work life may be exposed to many sources of vibration. Dangers of vibration at work are more often overlooked than not. Some vibration affects the whole body (WBV), e.g. when driving a dumper truck over rough and even ground. Here the vibration, in the form of large shocks or jolts, is transmitted to the whole body via their feet or the seat. This could cause injury to the lower back and spine.

The most common problem is Hand Arm Vibration (HAV). HAV is caused by exposure to vibration, e.g. from using hand power tools. This can be very disabling, causing severe pain in hands and arms and lack of hand movement and feeling in the fingers. It is preventable but permanent once the damage is done.

Dangers of Vibration at Work – HAV Symptoms

The most common HAV symptoms to look for are:

Tingling in the fingers.
Loss of feeling and sensation in the fingers.
Reduced strength in the hand.
Fingers that go white in the cold and then red and painful on recovery.

Dangers of Vibration at Work – HAV Controls

Dangers of vibration at work, i.e. risk from vibrating tools or machines can be minimised by:

Introducing methods that eliminate, substitute or reduce the exposure to vibration.
Avoiding prolonged or frequent use of vibrating equipment.
Keeping cutting tools sharp so they remain efficient.
Making sure equipment is well maintained.
Avoiding forcing or gripping the tool more than is necessary.
Wearing gloves to protect the hands.
Exercising and massaging the fingers during breaks to restore circulation.

Health surveillance is crucial to spot and respond to early signs of damage.

Dangers of Vibration at Work – Further Reading

Chapter 2 of Part 5 and Schedule 6 to the Safety, Health and Welfare at Work (General Application) Regulations 2007 (S.I. No. 299 of 2007) as amended by the Safety, Health and Welfare at Work (General Application) (Amended) Regulations 2007 (S.I. No. 732 of 2007) sets down the minimum requirements for the protection of workers from the health risks associated with vibration in the workplace. This is a legislation that looks into dangers of vibration at work.

The Health and Safety Authority of Ireland (HSA) on their webpage Vibration at Work provide relevant to vibration at work information.

Online Health and Safety Training

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Workplace Transport and Vehicles

Almost all businesses use some form of workplace transport and vehicles. There are many examples. A busy factory site with lorries being loaded for despatch. Forklift trucks whizzing around the site. Staff arriving for work in cars. Visitors and staff walking around the site and delivery vehicles reversing into dock loading bays.

Without controls aimed at workplace transport and vehicles, there is a high likelihood of an accident occurring. Unfortunately, almost every year a number of people are killed in vehicle accidents at the workplace.

Risk Assessment – Workplace Transport and Vehicles

A risk assessment must be carried out to identify the hazards and implement controls to minimise the risk. Such controls may include:

Clearly marking segregated traffic routes separating pedestrians from vehicles. This would be ideally done with physical barriers.
Making sure route ways are sufficiently wide for the vehicle, for example aisles between warehouse racking should be wide enough for a forklift truck to move easily and manoeuvre with loads.
Avoidance of obstructions in traffic routes by enforcing good housekeeping.
Sufficient lighting, both externally and internally, to enable drivers to identify obstructions, other vehicles and pedestrians.
Keeping traffic routes in good repair so uneven surfaces, holes, etc. do not cause vehicle damage or accidents.
Speed limits that are displayed and enforced as well as signage to alert drivers to other hazards such as low headroom, or overhead cables.
Designing traffic routes to avoid blind bends and where visibility is restricted, mirrors or implementing one-way systems should be considered.

Common Causes of Accidents

When we talk about workplace transport and vehicles, one of the most common vehicles used in the workplace is a forklift truck. They account for many of all workplace transport accidents.

Common causes of accidents are:

Driving too fast.
Unbalanced loads.
Horseplay.
Reversing.

Reversing of workplace transport and vehicles is a frequent cause of accidents. Consideration should be given to ensure adequate space for reversing vehicles and restricting access to the reversing area. This area should be clearly marked and signed.

Visiting drivers should be made aware of the site layout and transport routes. It may be necessary to provide instructions in other languages for foreign drivers and allow for the fact they may have different visibility from left hand drive vehicles.

Maintaining Safe Workplace and Transport Vehicles

There are many different types of workplace and transport vehicles that can be used. A proper selection will depend on the task to be performed. It is very important that the correct vehicle is selected for the appropriate task and that the vehicle is safe to use. As well as regular routine maintenance, there are some basic pre-use checks drivers should make. These include:

Horn.
Lights.
Brakes.
Tyres.
Oil Spillages.
Seat and Seat Belt.
Any Obvious Signs of Vehicle Damage.

Whichever vehicle is being driven, the driver must be trained and competent. Safe system of work should be in place to make sure unauthorised staff cannot operate vehicles and there are sufficient work breaks to stop drivers becoming overtired.

Safety Management Resources for workplace and Transport Vehicles

The Health and Safety Authority of Ireland provides a comprehensive key transport safety management resources available on their website page titled Vehicles at Work. The resources are a convenient and easy to use information portal. In addition, the HSA has published a convenient Information Sheet that provides basic guidance on the management of vehicles and mobile work equipment in the workplace.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Electricity in the Workplace

Most people use some form of electricity in the workplace daily. It is this familiarity that leads to carelessness with electricity and a disregard for the risks associated with it. Common issues are overloading electricity outlets, maintaining electrical equipment while it is still connected to the power supply, using plugs fitted with the wrong fuse and using equipment that does not have a fused plug fitted.

The Main Hazards with Electricity

Electricity can affect the worker in a number of ways:

Burns – electricity invariably burns (both entry and exit burns) and serious injuries can take a long time to heal.
Flash – electrical flashes are extremely bright and can burn or damage the eyes.
Shocks – electricity passing through the body can affect the heart. The consequences can be fatal.
Fires – a significant percentage of fires in the workplace are caused by electrical faults.

The risk of injury from electricity is strongly linked to where and how it is used. In addition, there is greater risk in wet and/or damp conditions.

Once the human body comes into contact with the electricity, it can be impossible to let go of the source of electricity. If the person who is in touch with electricity gets touched by another person, the electricity will flow through the other person as well. The human body is a good conductor of electricity.

Every electric shock has the potential to kill!

Example of an Avoidable Accident

This incident was reported in the UK by the Health and Safety Executive.

Refrigerated display cabinet in a café

A 19-year-old man was electrocuted and killed when he touched a refrigerated display cabinet in a café. Investigation showed that the 13A plug had been incorrectly refitted to the cabinet’s main lead.

This meant the metalwork of the cabinet, which should have been safe to touch, was dangerously live at mains voltage. The man’s sister received two shocks from the cabinet before realising what had happened to her brother.

How to avoid similar accidents

You must ensure that your electrical installation and equipment is safe. Don’t cut corners – electrical installations must be installed by someone who has the necessary training, skills and experience to carry out the work safely.

Using Electrical Equipment Safely

To ensure safe use of electrical equipment:

ALWAYS – Check the equipment before use.
ALWAYS – Switch it off before unplugging the machine.
ALWAYS – Report all faults immediately and remove the equipment from use so no-one else can use it and get injured.
ALWAYS – Turn off the power when servicing electrical equipment.
NEVER – Handle the plug with wet hands.
NEVER – Use electrical equipment in wet conditions.
NEVER – Use electrical equipment unless you have been trained in its use.
NEVER – Overload electrical sockets.
NEVER – Overload extension leads (don’t plug in a combination of appliances that will exceed the maximum current rating for the lead).
NEVER – Attempt repairs unless qualified to do so.

Electrical Equipment Checks

Electrical cables, flexes, tools and equipment should be regularly checked and faults reported. Portable appliances should be checked periodically by a competent person.

A high percentage of faults with electrical equipment can be found by just looking at it. Everyone can play a role in improving safety by making quick visual checks of the equipment they use.

When carrying out preventive maintenance things to look for are:

Damage to cables, e.g. cuts and abrasions to the cable covering.
Damage to plugs, e.g. cracked casing or broken pins.
Loose cables, e.g. the outer covering of the cable not being gripped properly by the plug.
Signs of overheating, e.g. burn marks, staining or melted plastic.
Bare wires (none should be visible).
Coiled extension cables (make sure coiled extension cables are fully extended when in use).

If any of these faults, or any other unusual state of the equipment can be noticed, a qualified person should undertake any necessary repairs. No electrical equipment should be used if there is any sign of damage.

Additional information can be found on Health and Safety Authority website and their Electricity pages.

Dealing with Electrical Shock

A shock occurs when an electrical current passes through the body. This can interfere with the body’s own electrical impulses and may cause the heart or breathing to stop. Burns may be seen where the current enters and exits the body. There may also be deep internal damage which cannot be seen along the path of the current.

In the event of someone suffering an electric shock:

Seek help and do not put yourself at risk.
Make sure the contact with the electricity is broken before you touch the casualty. Turn off the power at the mains or unplug the appliance if possible. Do not touch anything that is metal or wet.
For high voltage supplies (such as overhead power lines) do not allow anyone within 18 meters of the casualty.
Once the power is disconnected safely, someone with first aid knowledge can give first aid. This may involve giving CPR or treating any burns or injuries.
Take the casualty to hospital for a check up (even if they have apparently recovered). Call 999/112 for emergency help if the casualty has been unconscious or has electrical burns.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Health and Safety in the Workplace

Effective Health and Safety management in the workplace is an important element of every organisation. Every year, accidents at work cost the Irish industry billions of euros. The effects of the injuries sustained vary from minor to major injuries. In some cases, employees will be needing an extended period of time off work. In other cases they will never be able to work again. Unfortunately, in some cases they will receive injuries that would be fatal. The fact is, many of these accidents are avoidable and should have not happened.

Much of Health and Safety relies on ensuring that the appropriate risk precautions are in place. Additional information about workplace hazards are available in our blog entry from 21 April 2023 Workplace Accidents and Their Prevention. If individuals are aware of potential hazards and adopt safe working practices, they can control the risks and reduce the number of accidents and injuries.

Workplace Fatalities from 2017 to 2022

The work-related injuries include any injuries incurred by workers in the course of their work. These injuries can range from minor injuries to the most serious injuries that resulted in death. According to the Health and Safety Authority of Ireland and the Health and Safety Statistics they publish, the following is workplace fatalities statistics for years 2017 – 2022:

2017 – 47 fatalities.
2018 – 39 fatalities.
2019 – 48 fatalities.
2020 – 54 fatalities.
2021 – 38 fatalities.
2022 – 26 fatalities.

There have been 230 fatalities in Ireland since 2017.

Health and Safety in the workplace is an important aspect of any organisation. All work related fatalities are preventable through vigilance and effective Health and Safety management. All employees and persons affected by business activities deserve to go home after their work day has ended.

Common Causes of Accidents in the Workplace

Whilst not all workplace accidents result in death, the majority of them will result in an injury. Common causes of accident in the workplace are often:

Slips, trips and falls.
Poor lifting and carrying.
Being struck by vehicles or moving objects.
Falls from height.
Misuse of machinery.
Incorrect use of harmful substances.

Work related activities can also be responsible for diseases and ill health. These, in some cases, can have long term, irreversible effects. For example:

Hearing loss from noisy workplaces.
Stress
Skin disorders.
Hand Arm Vibration Syndrome (HAVS).
Back pain.
Asbestosis and cancer as a result of asbestos exposure.
Work-related lung diseases and cancers.

These hazards can be controlled by assessing risks and putting in effective controls. Effective health and Safety practices will not only minimise the pain and personal consequences to individual employees, but also reduce the financial impact on employers and services funded by the taxpayer.

Business and Human Costs of Ineffective Health and Safety in the Workplace

The costs on the business for ineffective Health and Safety in the Workplace can be significant:

Legal advice and insurance costs.
Legal action, possibly resulting in compensation.
Sick pay.
Lost production and sales.
Equipment and stock losses and damage.
Time and money spent on investigations and improvements.
Recruitment and payment of cover/replacement staff.

These, however, can fade into insignificance when weighed against the human cost:

Pain and suffering.
Disability, possibly long-term.
Health care and rehabilitation.
Loss of earnings.
emotional and financial burden on family.
Potential loss of life.

Safe working conditions are a prerequisite for a healthy and productive workforce.

Ineffective Health and Safety in the Workplace – From the Press

The Health and Safety Authority reported on 26th June 2023 that the company was fined €750,000 after fatal fall from height in workplace. The fatal incident occurred when a worker stepped onto a fragile surface. The fragile surface that sealed a vertical service duct which gave way and the worker fell from a height.

Mark Cullen, Assistant Chief Executive of the Health and Safety Authority, commented, “Where there is a known risk in a workplace, in this case working from height, employers in control of that workplace have a duty to ensure that the appropriate precautions are in place. This will protect employees and others who may be carrying out work activity at the place of work under their control. Failure by the employer in this case has led to the tragic death of a worker. We urge employers to carry out risk assessments and engage with their employees and others to ensure that incidents like this one are prevented.”

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Ergonomics in the Workplace

Ergonomics in the workplace is one of the most overlooked workplace related hazards. Ergonomics is the science of fitting the task to the person by designing equipment and apparatus that fits well with the human body and the way that it moves. People come in all shapes and sizes. This is why all workstations should be designed with adjustable features. For example, adjustable seats and work platforms. This will enable the worker to work comfortably. Uncomfortable workstation can result in people stooping, stretching, overreaching, twisting, etc. This can cause muscle fatigue and strain. In addition, it can possibly cause longer term damage or deformation.

Risk Assessing the Ergonomics in the Workplace

Some of the factors that should be considered when risk assessing the ergonomics of work activities are:

The degree of force that is needed to do the job.
The environmental conditions – lighting and temperature.
Adequacy of rest periods.
The repetitiveness of the task.

Any machine expected to carry out repetitive motions must be regularly maintained and parts replaced as they wear out. Failure to maintain machinery may result in breakdown. People may also be expected to carry out similar repetitive tasks and suffer wear and tear as a result. This can cause them to suffer permanent damage and being unable to work. Any activity involving high repetitions should be looked at carefully and redesigned to avoid this as far as possible.

Enabling Ergonomics in the Workplace

Some of the effective measures to enable good ergonomic practices in the workplace are:

Alternating tasks and work breaks to avoid repetitive strain injuries.
Providing comfortable working temperatures and adequate ventilation.
Providing sufficient lighting and minimising glare by glazing windows or supplying blinds.
Minimising vibration.
Mechanising the task.
Regular health tests may be necessary and should be promoted by employers.
Training will also help employees to be more aware of good practice.

Occupations commonly associated with musculoskeletal problems are computer users, checkout operators, dentists and workers on production lines. One of the preventive measures that should be taken to prevent injuries at work is Manual Handling training. The eLearn Safety provides blended learning Manual Handling course has been designed by our qualified tutors to assist the employer to comply with current legislation.

Ergonomics in the Workplace and Display Screen Equipment

Display screens cause many instances of eye and wrist strain, back problems and headaches. Some additional insights into problems caused by use of display screens can be found in our blog entry Prolonged Static Sitting at Work from 26 May 2023.

Many of the problems associated with the use of display screens can be mitigated by implementing effective measures to enable good ergonomic practices as listed in the previous paragraph.

Some additional measures should be provided/enabled:

Eye tests for regular users of display screen equipment.
Sufficient desk space to provide support for the forearms and at a height where they are parallel to the surface of the desk.
Height adjustable seating with back support and footrests available if necessary to facilitate correct posture and comfort.
Height adjustable display screens to enable them to be positioned so the eyes are level with the top of the screen. They should have filters (if older models to minimise flicker and glare), screen controls and be placed to avoid reflections on the screen.
Adequate work space under the desk to allow the operator to change positions.
Regular training in recognising the adverse effects that incorrect use can have on the body and how to correct incorrect postures. eLearn Safety offers a fully online VDU/DSE course.

Staff experiencing discomfort and pain whilst using display screen equipment should report these issues to their employer as soon as they become aware of them. To help understand the use of VDU/DSE, the Health and Safety Authority has published useful Display Screen Equipment – (DSE/VDU) – Frequently Asked Questions.

Online Health and Safety Training

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie