Workplace Risk Assessment

Workplace risk assessment is fundamental step of any workplace Safety Management System (SMS). A risk assessment is a process used to identify potential hazards and analyze what could happen if a disaster or hazard occurs.

 

Understanding Risk Assessment

In order to understand ‘risk’ and ultimately ‘risk assessment’ we must perhaps firstly comprehend what constitutes risk and what risk is. Why we, as humans take risks almost every day of our waking lives. We take risks at home, in the office, and certainly on our way to work in the mornings as we undergo the ‘commute’ and face the challenges inherent within.

Haimes (2009), discusses risk as an amalgamation of risk dimensions, but with a more ‘human’ understanding of a problem or ‘risk interpretation’. For example, the crusty ‘old timer’, has a subjective understanding of a system that only ‘he’ understands. To use an example of a ships’ engine, the ‘old boy’ can ‘hear’ the problem. They can almost ‘feel’ the problem, sensing the risk in its continued use as opposed to the new trainee. The new trainee approaches the problem from a ‘text book’ stance. Both individuals are aware of ‘risk’ but each approach the issue from completely different angles.

 

Risk as an Uncertainty Management

Power (2004), labels risk as ‘uncertainty management’. He goes on to discuss how we try to create ‘constructs’ in which we can work and live. For example, seatbelts, signage, ISO standards etc. Power (2004, p.9) states that “we cannot know the risks we face now or in the future but we must act as if we do”. This is perhaps the whole ‘crux’ of risk management and risk assessment. We ‘plan’ for an outcome, we anticipate it to a certain extent but we can never fully know what its full effect will be.

As previously mentioned, we wear seat-belts, and bikers wear helmets. Unfortunately, that that does not remove the risk of excessive speed or other motorists. We can experience a car crash, we can survive. We exit our vehicles in a state of shock but then we wander onto the motorway and are stuck by a passing vehicle whose driver’s attention has been taken up with their voyeuristic intent to see the carnage of our current situation. That momentary ‘lapse’ in their concentration dooms us. Although we have ‘planned’ for a certain risk, (a car crash), we have not planned for our own immobility or shock, nor the ignorance of outside observers.

 

Available Solutions

So, what can we do? How do we plan for risk and conduct adequate risk assessment. Can we remove or reduce the factors which precipitate disaster, and stop ourselves and others from for getting hurt? Hollnagel, (2008, p. 172) discuses resilience and how it requires the capacity for anticipation of risk and a management plan to be applied as risks arises. To this end, perhaps the ‘Robson Risk Management Model’ may be adequate and appropriate in this regard.

This model can be used in both a ‘personal’ concept and applied in an organisational context.

 

Perception of the Risk

The individual or organisation perceives that a risk may be inherent in a certain activity or action.

 

Risk Identification.

The risk(s) of the activity is ‘identified’ and ‘labelled’ (in the organisational context) with a ‘risk assessment’ form.

 

Assessing Risk

The risk is ‘assessed’ on the basis of its ‘potentiality’ and ‘gravity’. If we are competent and thoughtful driver, the likelihood that we will experience a car crash might be low, but still exist. The severity however, if we crash, might be catastrophic.

 

Risk Strategies

Stemming from the risk assessment above, numerous risk strategies are developed with a view to removing the risk even further. This can take the form of ‘avoidance’, transfer, retention or reduction. This is referred to as the ‘HOC’ or hierarchy of controls, and is applied as follows:

Eliminate hazard at source

Elimination of a hazardous material or method. This is a permanent solution which eliminates the offending item completely, however this may not always be a viable scenario. Some hazardous items must be used or worked with in their current state, such as ‘live’ munitions on a range.

Substitute hazard at source.

If it is possible to substitute an item. An example of which is when a military force might use ‘blank rounds’ for exercises and instruction of new entrants. This substitution completely removes the risk of ‘friendly fire’ occurring.

Isolate or enclose the hazard.

An example of this is range practices being conducted ‘only’ on certified and controlled ranges. An adequate security and signalling is there in place to prevent entry to non-firers and to inform others that a shoot is taking place. This allows for the hazard to be successfully isolated and controlled without the possibility of injury.

Engineering controls

Examples of this are the aforementioned security at ranges, flag system of notification and cordon enclosing the range.

Administrative controls

Adequate supply of qualified and experienced range managers ‘in situ’ to manage the firing, observe and enforce safety measures/controls and relieve one another for breaks throughout the day. This allows for fresh, focused and diligent staff to manage the activity.

Personal protective equipment (PPE)

The last measure is the use of the correct PPE. On range practices, shooters, range security, ‘butt party’ members (those controlling the targets) and range staff must all wear adequate PPE. PPE is in the form of a Kevlar helmet, double hearing protection and GSBA (general service body armour). This control enables an extra layer of protection in the unlikely event of a miss fire.

 

Risk Evaluation

Following all of the above measures, the risk is then re-evaluated in order to ascertain if it still poses the same levels of risk or if the necessary controls are adequate and appropriate to remove or reduce the threat as far as possible. However, it must always be borne in mind that the full elimination of risk is perhaps impossible as it encapsulates far too many variables (both known and unknown), such as human factors, equipment, environment and indeed the risk area itself, thus in order to live with risk we should perhaps understand that a measure of risk is ever present and ‘natural’ and may even be ‘necessary’ for our continued advancement as a species.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

Ergonomics in the Workplace

Ergonomics is the study of working interactions between humans and machines/workstations and the factors that affect those interactions. Stemming from the Greek words ‘ergo’ & ‘nomus’ (workflow) it is in simple terms ‘fitting’ the job to the person as opposed to fitting the person to the job.

 

Origins of the Ergonomics

Ergonomic practitioners draw upon a number of different disciplines. Some of these are ‘biomechanics’ (the study of human movement and the associated laws) and ‘anthropometry’ (the study of human measurements). These disciplines assist ergonomic practitioners in identifying ergonomic risk factors.

 

Importance of Ergonomics in the Workplace

Failure to apply the principles of ergonomics within the workplace i.e., a busy office environment or warehouse can result in chronic or acute musculoskeletal injuries. If left unchecked can result in functional limitations. Employees working in such environments are also susceptible to RSI ‘repetitive strain injuries’ and WRULD ‘work related upper limb disorders’.

When designing workstations ergonomic considerations are of significant importance. An ergonomic risk assessment can help to identify issues with existing workstations. However prior to conducting a risk assessment a task analysis should be conducted. A task analysis is conducted in order to get an appreciation of an employee’s daily routine. A task analysis will highlight current or potential issues for the employee, time spent at the work station, breaks, and shift work. All these should all be taken into consideration. In addition, biomechanics and anthropometrics will also play a part at this point.

 

Ergonomic Tools

Ergonomic practitioners can utilize a number of tools in order to assist them in rating the risks accordingly:

• Rapid employee body assessment (REBA) tool.
• Rapid upper limb assessment (RULA) tool.
• Assessment of repetitive tasks (ART) tool.

In addition, eLearn  Safety offers a full online VDU/DSE course. This course is fully online and can be taken 24/7. On completion of this VDU training course, participants will be provided with the information necessary to ensure current legislation is complied, risk assessments are carried out and all employees are competent to adjust their work stations to provide a safe place to work in.

Furthermore, a task analysis will help to identify if an employer is compliant with current legislation under the SHWW Act 2005. An office employees’ display screen is in essence a visual display unit. Therefore an employer must adhere to the guidance document within the general application regulations pertaining to VDU’s and display screen equipment.

 

Ergonomics in the Workplace Recommendations

Where office workers should be afforded the option to conduct his/her work both in the seated and standing position, employers must ensure chairs and VDU’s have the ability to be adjusted to suit all employees and consider frequent breaks and job rotation where practicable. Employers should also promote good working practices. For example, encouraging staff to make recommendations based on their working environments. If working in a warehouse or on a manufacturing line, workers should use appropriate equipment. A proper equipment will aid them in their jobs. Some of the examples are foot stools, foot rests, anti-glare eye protection, etc.

Employers should always be cognizant of the fact that ‘one shoe does not fit all’ when it comes to ergonomic assessments. For example a tall employee may feel cramped in a small area whereas a short employee may be uncomfortable if constantly reaching for items or if their feet are not supported when sitting.

Thus, structuring the working environment in order to suit the user is a step away from Taylors’ method of ‘scientific management’. Such a method, regardless of body shape and size or indeed the work being undertaken, was standardized across the board and the worker had to adapt him/herself to the factory conditions or face the prospect of dismissal and future injuries as a result.

 

Ergonomics Assessments

Ergonomic assessments are not difficult to undertake, and when carried out effectively can help to reduce the risk of ergonomic injuries and pain. In turn, this will help to motivate employees, allowing them to be more productive and happier in the working environment. Employers should always be aware of their responsibilities to their employees under the SHAWW Act and take the necessary steps to create risk free working environments where possible. Employees must also be aware of their rights and support any safety initiatives the employer wishes to implement, as the saying goes, ‘the rising tide floats every boat’.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Working at Height

Working at height and falling from height is one of the biggest causes of death in the workplace and one of the main causes of major injury. Such injuries do not necessarily involve falls from very high scaffolding. They can be caused by any fall above or even below ground level such as an access ladder to an inspection chamber or sewer.

 

Working at Height Hazards

There are many hazards associated with working at height. The most common hazards include:

• Using stepladders or unsuitable alternatives such as chairs or climbing on racking.
• Working on scaffolding and other access equipment with inadequate fall arrest controls.
• Falling through fragile roofs or skylights.
• Objects such as tools falling from height and injuring those below.

 

Preventing Working at Height Accidents

Preventing working at height accidents is important on many levels. It can avoid costly legal costs but more importantly it can prevent human suffering and in the worst case scenario – human fatality. Preventing accidents is everyone’s duty, from employer to employee. Accidents most often occur:

• People taking shortcuts and not using the correct equipment.
• Equipment is not available or in poor repair.
• Complacency, perhaps over-familiarity with the job.
• Lack of awareness of the risks of working at height.
• Inadequate training and supervision.

 

Managing and Selecting Equipment for Working at Height

There are a few simple – but important steps:

• Carry out a risk assessment of tasks that are at height. Include in the risk assessment any fragile surfaces that might break if someone worked on it or fell onto it, e.g. fibre and asbestos cement roof sheets and skylights.
• If at all possible, avoid working at height and consider if the task can be done in another way, for example using a sponge on an extendable pole to clean windows instead of climbing a ladder.
• If working at height cannot be avoided, use equipment or other measures to prevent falls, e.g. guard rails, work platforms, podium steps, tower scaffolds, cherry pickers or scissor lifts.
• When the risk of a fall cannot be eliminated, use equipment or other measures to minimise the distance and consequences of a fall, e.g. harnesses, netting and airbags.
• Avoid working on, near, or passing across, fragile surfaces, e.g. repair skylights form underneath or provide fixed walkways with guard rails.

Additional measures to reduce the risk of a fall when using equipment for working at height include making sure:

• The people have been trained to use it safely.
• It is well maintained and regularly inspected.
• There is adequate supervision to ensure people are working safely.

 

Working at Height – Ladders

Ladders are working at height equipment. Ladders may be suitable for light tasks of short duration, but suitable alternatives should be first considered. If ladders have been selected there are a few basic points to remember:

• Always check ladders for damage before use.
• Set them at the correct angle. The angle should be about 75° or the 1 in 4 rule, i.e., 1 unit out for every 4 units up. If they are at too steep an angle, the ladder could topple backwards and if too shallow an angle, it might slide down the wall.
• The ladders must be secure. The ladders should be on firm, level, non-slippery ground. Ladders should not be leaned against plastic guttering. Ladders should always lean against a firm and resistant resting point.
• Always grip the ladder and face the rungs when climbing. Try to avoid holding items when climbing but if you do need to carry something, have one free to grip the ladder.
• Do not overreach. Keep your belt buckle within the stiles.
• Keep both feet on the same rung throughout the task and don’t use the top 3 rungs of the ladder as this prevents a handhold.

 

Available Resources

The Health and Safety Authority of Ireland (HSA) has published a number of useful resources in relation to Working at Height. Some of these are:

• Guide to the Safety, Health and Welfare at Work (General Application) Regulations 2007
• Work at Height ToolBox Talk
• Mobile Elevated Work Platforms (MEWPs) Guidance on Safe Operating Procedures
• Working at Height in Agriculture Information Sheet

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Workplace Transport and Vehicles

Almost all businesses use some form of workplace transport and vehicles. There are many examples. A busy factory site with lorries being loaded for despatch. Forklift trucks whizzing around the site. Staff arriving for work in cars. Visitors and staff walking around the site and delivery vehicles reversing into dock loading bays.

Without controls aimed at workplace transport and vehicles, there is a high likelihood of an accident occurring. Unfortunately, almost every year a number of people are killed in vehicle accidents at the workplace.

 

Risk Assessment – Workplace Transport and Vehicles

A risk assessment must be carried out to identify the hazards and implement controls to minimise the risk. Such controls may include:

• Clearly marking segregated traffic routes separating pedestrians from vehicles. This would be ideally done with physical barriers.
• Making sure route ways are sufficiently wide for the vehicle, for example aisles between warehouse racking should be wide enough for a forklift truck to move easily and manoeuvre with loads.
• Avoidance of obstructions in traffic routes by enforcing good housekeeping.
• Sufficient lighting, both externally and internally, to enable drivers to identify obstructions, other vehicles and pedestrians.
• Keeping traffic routes in good repair so uneven surfaces, holes, etc. do not cause vehicle damage or accidents.
• Speed limits that are displayed and enforced as well as signage to alert drivers to other hazards such as low headroom, or overhead cables.
• Designing traffic routes to avoid blind bends and where visibility is restricted, mirrors or implementing one-way systems should be considered.

 

Common Causes of Accidents

When we talk about workplace transport and vehicles, one of the most common vehicles used in the workplace is a forklift truck. They account for many of all workplace transport accidents.

Common causes of accidents are:

• Driving too fast.
• Unbalanced loads.
• Horseplay.
• Reversing.

Reversing of workplace transport and vehicles is a frequent cause of accidents. Consideration should be given to ensure adequate space for reversing vehicles and restricting access to the reversing area. This area should be clearly marked and signed.

Visiting drivers should be made aware of the site layout and transport routes. It may be necessary to provide instructions in other languages for foreign drivers and allow for the fact they may have different visibility from left hand drive vehicles.

 

Maintaining Safe Workplace and Transport Vehicles

There are many different types of workplace and transport vehicles that can be used. A proper selection will depend on the task to be performed. It is very important that the correct vehicle is selected for the appropriate task and that the vehicle is safe to use. As well as regular routine maintenance, there are some basic pre-use checks drivers should make. These include:

• Horn.
• Lights.
• Brakes.
• Tyres.
• Oil Spillages.
• Seat and Seat Belt.
• Any Obvious Signs of Vehicle Damage.

Whichever vehicle is being driven, the driver must be trained and competent. Safe system of work should be in place to make sure unauthorised staff cannot operate vehicles and there are sufficient work breaks to stop drivers becoming overtired.

 

Safety Management Resources for workplace and Transport Vehicles

The Health and Safety Authority of Ireland provides a comprehensive key transport safety management resources available on their website page titled Vehicles at Work. The resources are a convenient and easy to use information portal. In addition, the HSA has published a convenient Information Sheet that provides basic guidance on the management of vehicles and mobile work equipment in the workplace.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie