Workers’ Memorial Day

Workers’ Memorial Day is marked around the world on the 28th April each year. On this date we remember those who have been killed or injured in work related incidents.

The Grim Statistics

Under the Safety, Health and Welfare at Work (General Application) Regulations 2016 all employers and self-employed persons are legally obliged to report the injury of an employee as a result of an accident while at work. In particular, injuries must be reported if an employee is unable to carry out their normal work for more than three consecutive days, excluding the day of the accident.

The work-related injuries include any injuries incurred by workers in the course of their work. To clarify, these injuries can range from minor injuries to the most serious injuries that resulted in death. According to the Health and Safety Authority of Ireland and the Health and Safety Statistics they publish, the following is workplace fatalities statistics for years 2013 – 2022:

• 2013 – 47 fatalities.
• 2014 – 55 fatalities.
• 2015 – 56 fatalities.
• 2016 – 48 fatalities.
• 2017 – 48 fatalities.
• 2018 – 39 fatalities.
• 2019 – 49 fatalities.
• 2020 – 54 fatalities.
• 2021 – 38 fatalities.
• 2022 – 28 fatalities.

The total number of fatalities for the period 2013/22 is staggering 462.

Workplace Injuries, Illnesses and Fatalities (2021–2022) – Full Report.

 

Non-Fatal Injuries Reported to the HSA

It is not only fatalities that can leave a lasting mark and cause human suffering. Of course, the physical and mental pain, and hardship in general resulting from injury and disability is impossible to quantify. The disruption to lives of workers and their families it causes is far reaching with lasting consequences.

In summary, in 2022, 9,070 non-fatal injuries were reported to the HSA which is an increase of 8% from the 8,371 reported in 2021. For example, the most injured body part for workers in 2022 was the back, associated with 26% of non-fatal incidents reported to the Authority. This is in keeping with recent years, with back injuries comprising 27% of all non-fatal injuries reported to the Authority between 2018 and 2022. Non-fatal back injuries were caused primarily by manual handling incidents.

 

Workplace Accidents

Accidents are a direct result of unsafe activities and unsafe conditions. These can be controlled by proactive management practices and employee awareness. The Management is responsible for the creation and maintenance of the working environment and work-related tasks. To prevent workplace injuries and illness the employer must:

• Provide and keep safe workplaces, machinery and equipment.
• Reduce the chance of risks when using any item or substance and from exposure to physical agents, noise and vibration.
• Prevent any improper conduct or behaviour which might put the safety, health and welfare of employees at risk (for example, ‘horseplay’ or bullying at work).
• Provide instruction and training to employees on health and safety.
• Provide protective clothing and equipment to employees at no cost to employees.
• Appoint a suitable person as the organisation’s safety officer.

Employees must be given information, and the knowledge that accidents are not inevitable but are caused. They need training to develop skills and recognise the need to comply with safe systems of work. Furthermore, they should take an active role in developing said safe systems of work and report and correct unsafe conditions and practices. Without doubt, employee safety awareness and attitudes require constant review and improvement where necessary.

 

The Purpose of Workers’ Memorial Day

The purpose of Workers’ Memorial Day is to remember those who have been killed or injured in work related incidents. However, the purpose of this day is more than just remembrance. Indeed, the purpose is to promote a safe work climate and culture, one which fosters good workplace safety and health practices and conditions. For additional information about workplace safety, please see eLearn Safety blog entry from 21st April 2023 titled Workplace Accidents and Their Prevention. In addition, a blog entry Workplace Hazards from 24th February 2023 provides some additional information about hazards in the workplace. For example, it looks into how to identify and address workplace hazards.

Accident prevention in the workplace is not just setting up a list of rules and enforcing these. Having said this, the rules are certainly important but they are and should be part of a larger picture – developing and managing a system for managing health and safety. Worker safety and health is everyone’s business and can only be tackled through a collaborative approach by all.

 

Workers’ Memorial Day 2024

We must remember those who have lost their lives at work, or from work-related injury and diseases. In addition, remembrance must be coupled with the commitment to fight for a world that’s more, not less, safe to live and work in.

To mark Workers’ Memorial Day 2024 there are a range of initiatives that your organisation should consider including:

• Hold a minute’s silence at 12 noon in your workplace.
• Get involved by using the national Workers’ Memorial Day Ireland logo on a website, social media presence, presentations, email signatures, displays and in offices and workplaces.
• Organise an in-house training sessions and/or a toolbox talk.
• Website/Social Media/Newsletter content.
• Organise Awareness Talk with a Guest speaker presentation to your staff.
• Use #WorkersMemorialDay on all social media activity.

It is very important to have an effective occupational health management system in place. Overall, there are sound economic reasons for reducing work-related accidents and ill-health, as well as ethical and regulatory reasons. Markedly, businesses that manage safety and health successfully invariably have a positive safety culture. Without a doubt, Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. With this in mind, it is important that new employees be properly trained and embrace the importance of workplace safety. In other words, the role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearnsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Reasons for Promoting Workplace Safety

Reasons for promoting workplace safety are numerous. Poor workplace safety can have serious business costs, human costs and legal costs. In addition, the need to protect people from injury and disease while they are at work has a strong moral reasoning. Every year, accidents at work cost the Irish industry millions of euros. The effects of the injuries sustained vary from needing an extended period of time off work, never being able to work again, to sometimes unfortunately, injuries being fatal.

 

Four Main Reasons for Promoting Workplace Safety

There are many reasons why accident prevention in the workplace is worthwhile. For the purpose of this text we will discuss four:

1. The cost of human suffering. The physical and mental pain, and hardship in general resulting from death and disability is impossible to quantify. The disruption to lives of workers and their families it causes is far reaching with lasting consequences.
2. Moral reasons. Societal development raised public awareness about quality of life at work and its importance. Workers safety, once seen as unimportant or marginally important business activity is now expected by the society in general. The business is viewed by the public through its treatment of its employees. This might directly influence employee attraction and retention rates and business profitability or lack of one.
3. Legal reasons. The statute law details steps to be taken and objectives to be met in terms of workplace health and safety. Compliance is not optional – it is mandatory. Non compliance might result in serious legal prosecutions, or other enforcement actions. In addition, the civil law enables injured workers and others to gain compensation either as a result of breach of statutory duties or because a reasonable standard of care was not provided under the particular circumstances.
4. Financial reasons. To ensure the continuing financial health of a business and to avoid the costs associated with accidents, implementation of accident prevention is a must.

 

Health and Safety Legislation

The Health and Safety Authority (HSA) is the statutory body in Ireland responsible for the enforcement of occupational health and safety law. The HSA reports directly to the Minister for Jobs, Enterprise and Innovation. Health and Safety legislation in Ireland is designed to secure and improve the Safety, Health and Welfare of people at work. Specifically, this is done by advocating a risk assessment approach to managing workplace safety. For additional information about risk assessments, please see eLearn Safety blog entry from 12th January 2024 titled Workplace Risk Assessment.

The main health and safety regulations in Ireland are the Safety, Health and Welfare at Work Act 2005 and Safety, Health and welfare at Work (General Application) Regulations 2007. The Act 2005 applies to employers, employees and the self-employed. Indeed, this is done in the interest of securing a preventive approach to occupational health and safety. In addition, the GA Regulations 2007 outline the specific workplace safety matters.

 

Achieving Workplace Safety

There are many obstacles to the achievement of safe working conditions. Specifically, most common obstacles are the pressure of production or performance targets, financial constraints and the complexity of the organisations. Unfortunately, these obstacles are sometimes blatant disregard of basic health and safety regulations and poor health and safety management practices.

In difficult economic times, organisations need to reduce their costs. This often impacts on the management of health and safety. For example, training of workers in safe systems of work or plant equipment maintenance could be neglected. One way to keep staff informed about workplace safety is eLearn Safety fully online Workplace Safety – Level 1 course. This course is ideal for every employee in any workplace that’s subject to Health and Safety Legislation. In other words, safety in the workplace is everyone’s responsibility. In particular, it provides all employees who participate on this course with information on how to identify hazards and carry out simple risk assessments.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearnsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Display Screen Equipment (DSE)

Display Screen Equipment (DSE), also referred to as a Visual Display Unit (VDU), may cause a number of health problems. Display screens cause many instances of eye strain, wrist strain, back problems and headaches. When seeking solutions to address these issues, a common mistake is to look into display equipment and the technology associated with it. However, to adequately address the issue of health problems associated with the use of DSE, we must understand common work activities ergonomics and the ill-health conditions associated with inadequate ergonomic design.

 

Display Screen Equipment (DSE) and the Relevant Legislation

The main legislation that addresses Display Screen Equipment (DSE) is the Safety, Health and Welfare at Work Act 2005. The main purpose of this legislation is to ensure and promote a preventive approach to occupational health and safety. However, a specific piece of legislation covers use of DSE specifically. The Safety, Health and Welfare at work (General Application) Regulations 2007 Chapter 5 of Part 2: Display Screen Equipment outlines the responsibilities of the employer with regard to the workstation of employees.

 

What the Term Display Screen Equipment (DSE) Covers (and What Does Not)

Schedule 4 of the Safety, Health and Welfare at Work (General Application) Regulations 2007 sets the minimum requirements for all Display Screen Equipment (DSE) that should be in place for workstations. The Schedule covers a number of elements, such as:

• Display Screen Equipment.
• Keyboard.
• Work Desk and/or Work Surface.
• Work Chair.
• Environment (such as space requirement, lighting, radiation, heat and humidity, noise).
• Employee Computer Interface (software should be suitable for the task and easy to use).

The following are not covered by the regulation:

• Drivers’ cabs or control cabs for vehicles and machinery.
• Computer systems on board a means of transport.
• Computer systems mainly intended for public use.
• Portable display screen equipment not in prolonged use at workstation.
• Typewriters of traditional design, of the type known as “typewriter with window”.

 

Basic Health Hazards Associated with Display Screen Equipment (DSE)

The basic health hazards associated with the use of DSE are:

• Musculoskeletal Problems (e.g., tenosynovitis).
• Visual Problems (e.g., visual fatigue, eye strain, sore eyes, headaches, and in extreme cases skin rashes and nausea).
• Psychological Problems (stress-related problems, often caused by environmental factors such as noise, heat, humidity and poor lighting, and poor managerial practices such as poor staff training, poor workstation design, high-speed working and lack of breaks).

 

Addressing the Issue – Display Screen Equipment (DSE)

To address the staff knowledge gap issue when working with Display Screen Equipment (DSE), eLearn Safety developed a fully online VDU/DSE training course. On completion of this VDU training course, participants will be provided with the information necessary to ensure current legislation is complied, risk assessments are carried out and all employees are competent to adjust their work stations to provide a safe place to work in.

All employers and staff who use VDU workstations for any length of time should do this course to learn how to avoid the range of adverse effects on the arm, hand and shoulder (WRULD’s) and other parts of the body.

Another useful course is Workplace Safety – Level 1. This course is ideal for every employee in any workplace that’s subject to Health and Safety Legislation. Safety in the workplace is everyone’s responsibility. It provides all employees who participate on this course with information on how to identify hazards and carry out simple risk assessments.

For additional information about workplace ergonomics, please see eLearn Safety blog entry from 23rd June 2023 titled Ergonomics in the Workplace. In addition, Display Screen Equipment – (DSE/VDU) – Frequently Asked Questions by the Health and Safety Authority of Ireland (HSA) provides useful information to tackle the issue of Display Screen Equipment (DSE) use.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Chemical Safety in the Workplace

Chemical Safety in the Workplace (and Occupational Health in general) is often overlooked when compared to Occupational Safety. The reason might be that the exposure to chemicals in the workplace might not cause illness or injury when exposure occurred, but months, if not years later. According to the Irish Cancer Society ‘work related cancer is increasing year on year with 5% of all cancers linked to occupation. Lung cancer represents nearly a quarter of all these cancers. Across Europe, exposure to cancer causing elements at work is estimated to cause at least 80,000 deaths a year. In Ireland this is over 400.’

The majority of the workplaces, across all industries use chemicals in some form. A number of chemicals are all around us to which employees could be routinely exposed. For example, paints, sprays, toners and inks, adhesives, petrol, solvents and not to mention a wide range of materials used in cleaning and maintenance such as detergents and oils.

All workplaces must assess the workplace against the risk of chemicals. These risks must be managed.

 

Why is Chemical Safety in the Workplace Important

Chemicals can cause serious harm. This harm can range from mild skin irritation to cancer. Whilst sometimes the effects of chemical exposure can be seen immediately after contact (e.g. chemical burn), some might be evident many years after the exposure (e.g. cancer – mesothelioma). Mesothelioma is related to asbestos exposure, continues to increase and it is estimated that about 56 people a year get this disease. There is no cure for this fatal form of asbestos related disease.

 

Chemical Safety in the Workplace and Key Duties of Employers and Employees

There are key duties for employers and employees under the relevant health and safety legislation:

Employers are required to:

• Determine which hazardous substances are present in the workplace.
• Assess the risks to employees and others from the presence of these hazardous substances.
• Prevent or control exposure to the hazardous substances to as low a level as is reasonably practicable.
• Have arrangements in place to deal with accidents, incidents and emergencies.
• Provide information, training and consultation to employees.
• Make available health surveillance to employees.

Employees also have duties. They must:

• Co-operate with their employer e.g. follow procedures.
• Make full and proper use of control measures e.g. using extract ventilation where provided, and report any defects.
• Report any defects in plant/ equipment immediately to the employer as appropriate.
• Report any accident or incident which may have resulted in the release of a dangerous
• chemical/substance into the workplace.

 

Assessing Chemical Safety in the Workplace

A chemical risk assessment follows the same steps as a risk assessment for any other hazards in the workplace. For some additional information, please read eLearn Safety blog entry from 12 January 2024 titled Workplace Risk Assessment.

There are three basic steps to chemical risk assessment:

1. Identify the Hazard: This involves identifying the chemicals you have in your workplace and the hazards associated with them.
2. Assess the Risk: This involves assessing the risk from chemicals or processes in your workplace.
3. Control the Exposure: This involves considering the various recognized control measures to eliminate or reduce the risk.

Please remember – if you are unsure of any aspect of managing chemicals safely in your workplace, you should seek help from a competent person.

 

Implementation of Suitable Control Measures

Once you have assessed the risk associated with the use of your chemicals, you then need to decide what control measures are required to keep you, your employees and your workplace safe.
At this stage you should also consider any current control measures that are in place, such as:

• Type of engineering controls e.g. enclosures and ventilation – are they effective and maintained regularly?
• Current work practices or procedures.
• Personal protective and safety equipment.
• Training provided to employees. The Chemical Safety course provided by eLearn Safety is a fully online course that describes the risks associated with exposure to chemicals and looks into control measures in place to avoid the risks.
• Hygiene arrangements e.g. separate meal and wash facilities.
• Storage arrangements.
• Level of housekeeping.
• Disposal of waste.
• Emergency procedures e.g. eyewash, emergency shower.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Workplace Health and Safety Signs

Workplace health and safety signs are essential examples of work-related information. To make sure employees, visitors and contractors are aware of health and safety issues, employers are required to clearly display relevant health and safety information.

 

Safety Signs

The Safety Health and Welfare at Work (General Application) Regulations 2007 (Chapter 1 of Part 7: Safety Signs at Places of Work) apply to safety signs. The colour and shape of the safety signs are specified in this piece of legislation. They are as follows:

• Prohibition: Red border and crossbar from top left to bottom right, on a white background (e.g., no smoking).
• Mandatory: Circular in shape with a white symbol on a blue background (e.g., wear ear protection).
• Safe Condition: Square or rectangular in shape, with a white symbol on a green background (e.g., first aid equipment).
• Warning: Yellow triangle with a black border (e.g., slippery floor).
• Information: Square or rectangular in shape, with a white symbol on a red background (e.g., fire extinguisher).

 

Additional Information

The Health and Safety Authority (HSA) has a number of useful resources. These resources can be accessed through the HSA website page Safety Signs.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Workplace Risk Assessment

Workplace risk assessment is fundamental step of any workplace Safety Management System (SMS). A risk assessment is a process used to identify potential hazards and analyze what could happen if a disaster or hazard occurs.

 

Understanding Risk Assessment

In order to understand ‘risk’ and ultimately ‘risk assessment’ we must perhaps firstly comprehend what constitutes risk and what risk is. Why we, as humans take risks almost every day of our waking lives. We take risks at home, in the office, and certainly on our way to work in the mornings as we undergo the ‘commute’ and face the challenges inherent within.

Haimes (2009), discusses risk as an amalgamation of risk dimensions, but with a more ‘human’ understanding of a problem or ‘risk interpretation’. For example, the crusty ‘old timer’, has a subjective understanding of a system that only ‘he’ understands. To use an example of a ships’ engine, the ‘old boy’ can ‘hear’ the problem. They can almost ‘feel’ the problem, sensing the risk in its continued use as opposed to the new trainee. The new trainee approaches the problem from a ‘text book’ stance. Both individuals are aware of ‘risk’ but each approach the issue from completely different angles.

 

Risk as an Uncertainty Management

Power (2004), labels risk as ‘uncertainty management’. He goes on to discuss how we try to create ‘constructs’ in which we can work and live. For example, seatbelts, signage, ISO standards etc. Power (2004, p.9) states that “we cannot know the risks we face now or in the future but we must act as if we do”. This is perhaps the whole ‘crux’ of risk management and risk assessment. We ‘plan’ for an outcome, we anticipate it to a certain extent but we can never fully know what its full effect will be.

As previously mentioned, we wear seat-belts, and bikers wear helmets. Unfortunately, that that does not remove the risk of excessive speed or other motorists. We can experience a car crash, we can survive. We exit our vehicles in a state of shock but then we wander onto the motorway and are stuck by a passing vehicle whose driver’s attention has been taken up with their voyeuristic intent to see the carnage of our current situation. That momentary ‘lapse’ in their concentration dooms us. Although we have ‘planned’ for a certain risk, (a car crash), we have not planned for our own immobility or shock, nor the ignorance of outside observers.

 

Available Solutions

So, what can we do? How do we plan for risk and conduct adequate risk assessment. Can we remove or reduce the factors which precipitate disaster, and stop ourselves and others from for getting hurt? Hollnagel, (2008, p. 172) discuses resilience and how it requires the capacity for anticipation of risk and a management plan to be applied as risks arises. To this end, perhaps the ‘Robson Risk Management Model’ may be adequate and appropriate in this regard.

This model can be used in both a ‘personal’ concept and applied in an organisational context.

 

Perception of the Risk

The individual or organisation perceives that a risk may be inherent in a certain activity or action.

 

Risk Identification.

The risk(s) of the activity is ‘identified’ and ‘labelled’ (in the organisational context) with a ‘risk assessment’ form.

 

Assessing Risk

The risk is ‘assessed’ on the basis of its ‘potentiality’ and ‘gravity’. If we are competent and thoughtful driver, the likelihood that we will experience a car crash might be low, but still exist. The severity however, if we crash, might be catastrophic.

 

Risk Strategies

Stemming from the risk assessment above, numerous risk strategies are developed with a view to removing the risk even further. This can take the form of ‘avoidance’, transfer, retention or reduction. This is referred to as the ‘HOC’ or hierarchy of controls, and is applied as follows:

Eliminate hazard at source

Elimination of a hazardous material or method. This is a permanent solution which eliminates the offending item completely, however this may not always be a viable scenario. Some hazardous items must be used or worked with in their current state, such as ‘live’ munitions on a range.

Substitute hazard at source.

If it is possible to substitute an item. An example of which is when a military force might use ‘blank rounds’ for exercises and instruction of new entrants. This substitution completely removes the risk of ‘friendly fire’ occurring.

Isolate or enclose the hazard.

An example of this is range practices being conducted ‘only’ on certified and controlled ranges. An adequate security and signalling is there in place to prevent entry to non-firers and to inform others that a shoot is taking place. This allows for the hazard to be successfully isolated and controlled without the possibility of injury.

Engineering controls

Examples of this are the aforementioned security at ranges, flag system of notification and cordon enclosing the range.

Administrative controls

Adequate supply of qualified and experienced range managers ‘in situ’ to manage the firing, observe and enforce safety measures/controls and relieve one another for breaks throughout the day. This allows for fresh, focused and diligent staff to manage the activity.

Personal protective equipment (PPE)

The last measure is the use of the correct PPE. On range practices, shooters, range security, ‘butt party’ members (those controlling the targets) and range staff must all wear adequate PPE. PPE is in the form of a Kevlar helmet, double hearing protection and GSBA (general service body armour). This control enables an extra layer of protection in the unlikely event of a miss fire.

 

Risk Evaluation

Following all of the above measures, the risk is then re-evaluated in order to ascertain if it still poses the same levels of risk or if the necessary controls are adequate and appropriate to remove or reduce the threat as far as possible. However, it must always be borne in mind that the full elimination of risk is perhaps impossible as it encapsulates far too many variables (both known and unknown), such as human factors, equipment, environment and indeed the risk area itself, thus in order to live with risk we should perhaps understand that a measure of risk is ever present and ‘natural’ and may even be ‘necessary’ for our continued advancement as a species.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

 

Ergonomics in the Workplace

Ergonomics is the study of working interactions between humans and machines/workstations and the factors that affect those interactions. Stemming from the Greek words ‘ergo’ & ‘nomus’ (workflow) it is in simple terms ‘fitting’ the job to the person as opposed to fitting the person to the job.

 

Origins of the Ergonomics

Ergonomic practitioners draw upon a number of different disciplines. Some of these are ‘biomechanics’ (the study of human movement and the associated laws) and ‘anthropometry’ (the study of human measurements). These disciplines assist ergonomic practitioners in identifying ergonomic risk factors.

 

Importance of Ergonomics in the Workplace

Failure to apply the principles of ergonomics within the workplace i.e., a busy office environment or warehouse can result in chronic or acute musculoskeletal injuries. If left unchecked can result in functional limitations. Employees working in such environments are also susceptible to RSI ‘repetitive strain injuries’ and WRULD ‘work related upper limb disorders’.

When designing workstations ergonomic considerations are of significant importance. An ergonomic risk assessment can help to identify issues with existing workstations. However prior to conducting a risk assessment a task analysis should be conducted. A task analysis is conducted in order to get an appreciation of an employee’s daily routine. A task analysis will highlight current or potential issues for the employee, time spent at the work station, breaks, and shift work. All these should all be taken into consideration. In addition, biomechanics and anthropometrics will also play a part at this point.

 

Ergonomic Tools

Ergonomic practitioners can utilize a number of tools in order to assist them in rating the risks accordingly:

• Rapid employee body assessment (REBA) tool.
• Rapid upper limb assessment (RULA) tool.
• Assessment of repetitive tasks (ART) tool.

In addition, eLearn  Safety offers a full online VDU/DSE course. This course is fully online and can be taken 24/7. On completion of this VDU training course, participants will be provided with the information necessary to ensure current legislation is complied, risk assessments are carried out and all employees are competent to adjust their work stations to provide a safe place to work in.

Furthermore, a task analysis will help to identify if an employer is compliant with current legislation under the SHWW Act 2005. An office employees’ display screen is in essence a visual display unit. Therefore an employer must adhere to the guidance document within the general application regulations pertaining to VDU’s and display screen equipment.

 

Ergonomics in the Workplace Recommendations

Where office workers should be afforded the option to conduct his/her work both in the seated and standing position, employers must ensure chairs and VDU’s have the ability to be adjusted to suit all employees and consider frequent breaks and job rotation where practicable. Employers should also promote good working practices. For example, encouraging staff to make recommendations based on their working environments. If working in a warehouse or on a manufacturing line, workers should use appropriate equipment. A proper equipment will aid them in their jobs. Some of the examples are foot stools, foot rests, anti-glare eye protection, etc.

Employers should always be cognizant of the fact that ‘one shoe does not fit all’ when it comes to ergonomic assessments. For example a tall employee may feel cramped in a small area whereas a short employee may be uncomfortable if constantly reaching for items or if their feet are not supported when sitting.

Thus, structuring the working environment in order to suit the user is a step away from Taylors’ method of ‘scientific management’. Such a method, regardless of body shape and size or indeed the work being undertaken, was standardized across the board and the worker had to adapt him/herself to the factory conditions or face the prospect of dismissal and future injuries as a result.

 

Ergonomics Assessments

Ergonomic assessments are not difficult to undertake, and when carried out effectively can help to reduce the risk of ergonomic injuries and pain. In turn, this will help to motivate employees, allowing them to be more productive and happier in the working environment. Employers should always be aware of their responsibilities to their employees under the SHAWW Act and take the necessary steps to create risk free working environments where possible. Employees must also be aware of their rights and support any safety initiatives the employer wishes to implement, as the saying goes, ‘the rising tide floats every boat’.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Working in Confined Spaces

Working in confined spaces is a high risk working environment.

 

What does it mean Working in Confined Space

Any significantly enclosed space where there is a risk of death or serious injury from hazardous substances, lack of oxygen or other dangerous conditions is classed as a confined space. Confined spaces with small openings such as silos, drains, sewers and storage tanks are fairly obvious. Others are not. Ductwork, vats, open-topped chambers may be less obvious.

 

Before Working in Confined Space Commence

Before working in confined space commences, certain steps should be taken. All hazards present must be identified and the risks assessed. This information should then be used to determine what precautions are needed and safety procedures developed (including emergency rescue).

 

Confined Space Entry

If working in confined spaces can be avoided – it should be avoided.

According to the Health and Safety Authority of Ireland and the Safety, Health and Welfare at Work (Confined Spaces) Regulations 2001, Regulation 5 states that:

A person shall not carry out work in Confined Spaces if it is reasonably practicable that it could be avoided.

If the work must be carried out Hazard Identification and Risk Assessment must be carried out prior to the work commencing.

A person shall not enter a confined space unless there is a system of work in place that has been planned, organised, performed and maintained so as to render that work safe and without risk to health.

Anyone entering a confined space must be provided with appropriate information, training and instruction appropriate to the particular characteristics of the proposed work activities.

 

Questions to Ask

Before working in confined space commence, the following should be considered:

If someone is working in a confined space, think about the following:

• If a worker gets overcome by fumes how will anyone know this is happening?
• Once workers become overcome by fumes how can they be rescued?

Always:

• Make sure you are fully aware of all the risks associated with working in confined space!
• Make sure that the person performing work in confined space is competent (capable and trained) to work in confined spaces and in use of emergency equipment.

Never:

• Work in confined spaces if it can be avoided.
• Let unskilled people engage in confined space work.
• Let anyone enter confined space unless sure it is safe to do so.
• NEVER ignore risks associated with working in confined space.

 

Useful Resources

The Health and Safety Authority of Ireland (HSA) has a very useful info page titled Working in Confined Spaces. This page covers some of the most frequently asked questions about working in confined spaces.

In addition, the UK’s Health and Safety Executive info page titled Introduction to working in confined spaces can provide additional very useful information about working in confined spaces.

 

Tragic Example

As The Irish Times reported; on June 10th, 2015 brothers Alan (45) and Stephen Harris (32) were overcome by fumes while working in an underground sewer at Drumnigh Woods, Portmarnock, Co Dublin. They were taken from the sewer and taken to hospital but unfortunately died of hypoxia due to toxic levels of hydrogen sulphide.

The brothers were wearing wader boots and rain jackets and Stephen Harris was wearing a dust mask.

A toxic gas incident that claimed the lives of two brothers almost killed a fireman attempting to rescue them.

How It Could Have Been Avoided

Health and Safety Authority inspector Frank Kerins said the job required specialist equipment in accordance with confined space regulations, including a gas detector and breathing apparatus.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie

Pressure and Gas at Work

Pressure and gas at work from a mains supply can be very dangerous. Gas from mains is an explosive hazard if not used correctly. In addition, poorly maintained systems can cause death from carbon monoxide poisoning. It is important to make sure anyone employed to work on gas appliances is a Registered Gas Installer (RGI). According to Gas Networks Ireland:

“A Registered Gas Installer is an installer or service engineer who has completed the required gas installation safety training, who has the necessary insurance to carry out gas installations to the legal standard and who is registered with the Register of Gas Installers of Ireland.”

You should never use an unregistered gas installer to carry out work on your gas appliances, such as gas boilers, no matter how seemingly convenient or tempting it may be. Not even if this unregistered engineer is Daniel O’Donnell.

Even if it’s Daniel – Registered Gas Installers 30 second TVC. Run time 30s.

 

Pressure Systems

A pressure vessel is a container that holds a liquid or gas under pressure. A pressure system is one or more such vessels including associated pipework. Examples of pressure systems include compressed air systems, boilers, steam heating systems and autoclaves. If a pressure system fails during operation it can kill or injure people in the area. In addition, a significant damage to the property can happen due to impact from the blast, debris from the explosion and fire from escaping flammable gases or liquids.

 

Gas Cylinders

Gas cylinders can cause the same injuries as pressure vessels should the cylinder fail or be damaged. In addition, they can cause manual handling injuries from lifting and carrying heavy cylinders and crush injuries should cylinders fail.

Basic handling precautions include:

• Securing cylinders upright so they do not fall.
• Keeping cylinders away from fire.
• Making sure cylinders are not dropped or banged.
• Moving larger cylinders with a special hand truck rather than dragging or rolling them.
• Always checking the identity of the gas before using it.

The Health and Safety Authority of Ireland (HSA) has a useful information page about gas titled Liquefied Petroleum Gas (LPG) Storage.

General Pressure and Gas at Work Controls

General controls when pressure and gas at work are in question include:

• Regular maintenance and correct repair from a competent person.
• Safe systems of work.
• Training and supervision.

 

Online Health and Safety Training

Proactive Health and Safety training is critical to ensure a safe workplace. An effective training program can reduce the number of worker injuries and deaths. It can also reduce instances of property damage, legal liability, illnesses, and missed time from work.

Health and Safety training helps establish a culture in which employees themselves help promote proper safety procedures while on the job. It is important that new employees be properly trained and embrace the importance of workplace safety. The role of training in developing and maintaining effective hazard control activities is a proven and successful method of intervention.

This is why we have established Myelearsafety school. We pride ourselves in how we guide, support and mentor our students. They receive support throughout their learning experience and into their working lives. Our staff have extensive training experience and also have many years industry experience. We understand the challenges that exist within Environmental and Occupational Health and Safety. Our priority is to ensure that all learners are fully prepared to differentiate themselves in the workplace after completing our Health and Safety courses.

Myelearnsafety offers fully online Health and Safety courses.

To find out more, please check our Courses page.

Alternatively, should you need any additional information, please do not hesitate to let us know via email info@elearn.ie